Newbiehack-Development Tools-Testers-Prototyping-LCD Displays And Leds-Displays-Voltage-Current-Amp-Display-10A-100V

Advance Your Skills Professionally! Advance Your Skills Professionally! 'ARM Microcontrollers: Programming and Circuit Building Volume 1', accompanied by a beginner-friendly advanced kit, is the ideal starting point for aspiring professionals. Esteemed in universities and high schools, this guide bypasses the complexities of Arduino, offering a more fundamental, bare-metal approach to learning. It not only simplifies the process but also sets you on a path to a more professional level in microcontroller programming. Perfect for students and hobbyists, this book is your gateway to efficiently prototyping and transitioning projects into production. Start with the fundamentals and quickly move to creating professional-level applications!

White prototyping breadboard with 30 tie strips and two power rails on each side.

White Prototyping Breadboard (2x30 columns of tie strips and 2x2 rows of power strips)

$7.95

Qty:

Clear Prototyping Breadboard (2x30 columns of tie strips and 2x2 rows of power strips)

$8.50

Qty:

Thumbnail: A bundle of 65 jumper wires of various length and color. Bound together with the male connectors shown in the foreground.

Bundle of 65 Male to Male Flexible Jumper Wires

$8.95

Qty:

A single mini breadboard 17X10. Black color.

Jumper Wire Pack 140 Pieces Multi-Size Multi-Color

$6.75

Qty:

40 pin IC Socket

$0.89

Qty:

Panel Mount Voltage and Current Display

Voltage and current display height measurement for panel opening

Voltage and current display width measurement for panel opening.

Introduction:

Are you ever curious what voltage or current your device, widget or thing is using at any given time? Here is a small panel display that will show you the current and voltage.

Description:

Power this voltage (V) / current (A) with 4.5V to 30V at the input wires, the smaller gauge wires that are red and black. The display will measure up to 100V and 10 Amps.

Use the larger gauge wires to connect to the load that you want to measure and show.

The case of the voltage and amp display has tabs that make it very convenient to mount on a panel of any thickness. The height of the back par of the case measures a smidgen over one inch (1.02 inches or 25.9 mm). The width of the back part of the case is 1.8 inches or 45.7 mm. These dimensions are critical in the opening you need to make for the panel. The tabs stick out about 0.05 inches for the side of the case.

Panel Mount Dual Voltage/Ammeter

$7.95

Qty:

Learn about the Panel Mount Voltage and Current Display

General Description of Microcontrollers

A general explanation of the uses and applications of microcontrollers. Microcontrollers can be used to: sense the environment using sensors, control other components with general purpose output pins,...

AVR Microcontroller and Pin Assignments

Introduction to the Atmel Atmega32 AVR microcontroller and the pin assignments (what each pin of the chip does). The pins include PORTs (PORTA, PORTB, PORTC and PORTD) and 8 pins for each port, ADC (...

Concept of Transferring a Program to a Microcontroller

Introduction to the concept of transfering a program from the computer to the microcontroller using a programmer like the USBTiny.

Introduction to Programmers (USBTiny) for Microcontrollers

Introduction to programmers line the USBTiny and the Pocket AVR and that this device is plugged into the computer and to the microcontroller (chip) to transfer the program from the computer to the mic...

SPI Description and Pinout

Introduction to SPI (Serial Peripheral Interface) and which pins are connected together (pinout) from the microcontroller to the specific SPI pin functions (MISO,MOSI,SCK,Reset, VCC and GND).

Learn the Fundamentals of Mechatronics!

Panel Mount Voltage and Current Display

Learn about the Panel Mount Voltage and Current Display