Step 19: X-Axis Motor Mount

The x-axis motor mount is the easiest because, first, you've done two already and you're an expert, and last because there are few obstructions in your way. In this build, just like the last, the process is exactly the same. There is one minor change, but it will be preferred by most builders. Each motor mounting hole will contain a screw and three nuts. One nut lodged into the hole in the mount. Two nuts between the mount and the motor. These nuts will add extra support by tightening one to the motor side and one to the MDF side. This way, the motor is stabilized and the nut against the MDF is tensioning with the nut in the hole so the nut in the hole will not have the tendency to move.