https://www.newbiehack.com/ daily https://www.newbiehack.com/products/custom-plug-and-play-cnc-control-electronics-system 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2023-11-09115248-800.jpg?v=1728347602 Custom Plug-and-Play CNC Control Electronics System https://www.newbiehack.com/products/usb-cable 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/USBCable10FTMaleAtoMaleB1-800_1.jpg?v=1729384261 USB Cable https://www.newbiehack.com/products/bearing-3125-standardbearing 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/bearingforsale609zz.jpg?v=1730083858 5/16" Bearings Tumbnail: https://www.newbiehack.com/products/bearing-v-groove-375 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/new_20v-groove_20200.jpg?v=1730083860 V-Groove Bearings 3/8 inch ID Tumbnail: https://www.newbiehack.com/products/bearing-25-standardbearing 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/bearing_201-4_20medium.jpg?v=1730083862 Bearings - Position 1/4" Lead Screws Tumbnail: https://www.newbiehack.com/products/bearing-5-standardbearing 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/bearing_201-2_20medium.jpg?v=1730083864 Bearings - Position 1/2" Lead Screws Tumbnail: https://www.newbiehack.com/products/bearing-375-standardbearing 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/bearing3-8.jpg?v=1730083866 Bearings - Position 3/8" Lead Screws Tumbnail: https://www.newbiehack.com/products/coupling-rigid-steel-25-25 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/steel_20rigid_20coupling1-4to1-4-200.jpg?v=1730083873 1/4" to 1/4" - Rigid Coupling (Steel) - (1/4" bores at each end) Tumbnail: https://www.newbiehack.com/products/coupling-rigid-plastic-25-25 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/rigid_20coupling_201-4_20to_201-4_20200.jpg?v=1730083893 1/4" to 1/4" - Rigid Coupling (Plastic/Delrin) - (1/4" bores at each end) Tumbnail: https://www.newbiehack.com/products/coupling-rigid-plastic-5-25 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/rigid_20coupline_201-4_20to_201-2_20200_2a3ba24c-46b8-4332-b141-69188abdeddf.jpg?v=1730083895 1/2" to 1/4" - Rigid Coupling (Plastic/Delrin) Tumbnail: https://www.newbiehack.com/products/coupling-flexiblecoupling 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/coupling_20configuration_202_20medium_462ab739-f64e-499b-862d-ccb90c61e8a0.jpg?v=1730083897 Flexible Coupling Sets - Connects a single motor to a lead screw end (Two Hubs and One Middle Spider) Tumbnail: https://www.newbiehack.com/products/coupling-hub-25-flexiblecoupling 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/coupling_201-4_20medium_a21a4100-ed2f-4551-a7e9-997ff455cfe4.jpg?v=1730083899 Flexible Coupling Hub - 1/4" Bore Tumbnail: https://www.newbiehack.com/products/coupling-hub-3125-flexiblecoupling 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/coupling_201-4_20medium.jpg?v=1730083901 Coupling Hub - 5/16" Bore Tumbnail: https://www.newbiehack.com/products/coupling-hub-375-flexiblecoupling 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/coupling_203-8_20medium_1c978547-8103-42bf-bb0e-39749c8a8740.jpg?v=1730083903 Coupling Hub - 3/8" Bore Tumbnail: https://www.newbiehack.com/products/coupling-hub-5-flexiblecoupling 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/coupling_201-2_20medium_3ada18a0-ddfc-40a9-ad18-213c4aff05cf.jpg?v=1730083905 Coupling Hub - 1/2" Bore Tumbnail: https://www.newbiehack.com/products/coupling-hub-625-flexiblecoupling 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/coupling_205-8_20medium_a90ee7f1-c81e-4cdd-9772-25c54b9453e4.jpg?v=1730083907 Coupling Hub - 5/8" Bore Tumbnail: https://www.newbiehack.com/products/coupling-spider-flexiblecoupling 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/coupling_20spider_20medium_dd775400-3ba1-437b-9fd5-714e450589fe.jpg?v=1730083909 Coupling Spider (goes between two coupling hubs) Tumbnail: https://www.newbiehack.com/products/coupling-rigid-steel-5-75 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0101-800_bf4c4876-7257-43dc-b32a-b318a0e6e6a3.jpg?v=1730085828 1/2" to 3/4" - Rigid Coupling Steel 1/2 to 3/4 steel rigid coupling https://www.newbiehack.com/products/coupling-hub-375-flexiblecoupling-large 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9945-800_e9b6d973-048e-461d-a70b-dc57b1283bc5.jpg?v=1730085904 Coupling Hub - 3/8" Bore Large L070 three eighths inch coupling hub large https://www.newbiehack.com/products/coupling-rigid-aluminum-5-5-coupling-rigid-steel-5-5 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20190405_172730-800_13c8245c-a2cb-42cb-aa99-a356377a1981.jpg?v=1730083886 1/2" to 1/2" - Rigid Coupling Aluminum- 1/2" bores at each end https://www.newbiehack.com/products/coupling-rigid-aluminum-25-5 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20190419_181515-800_a71d64e1-d63e-473c-8632-ce38869bb52f.jpg?v=1730085839 1/2" to 1/4" - Rigid Coupling Aluminum 1/2" to 1/4" rigid aluminum coupling coupler showing the 1/4" end https://www.newbiehack.com/products/coupling-rigid-one-piece-25-5 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_7082-800_a8a56f0a-6dd6-4849-ba4c-86b8839b8ace.jpg?v=1730087138 1/2" to 1/4" One Piece Flexible Clamping Coupling Main view of the 1/4" to 1/2" (12.7mm to 6.35mm) one piece flexible clamping coupling https://www.newbiehack.com/products/coupling-rigid-aluminum-5-14mm 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/A6302121-800.jpg?v=1730087218 14mm to 1/2" - Rigid Coupling (Aluminum) 1/2" side view of the 14mm to 1/2" coupling https://www.newbiehack.com/products/coupling-rigid-aluminum-8mm-5-coupling-rigid-steel-8mm-5 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-09-18_20133454-800.jpg?v=1730087356 8mm to 1/2" - Rigid Coupling Aluminum 8mm to 12.7mm Shaft Coupling, Aluminum Rigid Clamp-on main image https://www.newbiehack.com/products/bearing-625-standardbearing 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/bearing_205-8_20medium.jpg?v=1730083868 Bearings - 5/8" ID R10 Tumbnail: https://www.newbiehack.com/products/electronicsandmotors-3axis-425-elcombo 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/3axis425.jpg?v=1730083911 3 Axis Electronics Combo Thumbnail: https://www.newbiehack.com/products/electronicsandmotors-4axis-425-elcombo 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/4axis425.jpg?v=1730083913 4 Axis Electronics Combo Tumbnail: https://www.newbiehack.com/products/electronicsandmotors-3axis-heavy-gantry-elcombo 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/3axisheavygantry.jpg?v=1730083914 3 Axis Electronics Combo (For Heavy Gantry) Tumbnail: https://www.newbiehack.com/products/electronicsandmotors-3axis-651-elcombo 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/3axis650.jpg?v=1730083916 3 Axis Electronics Combo (All Large Motors) Tumbnail: https://www.newbiehack.com/products/electronicsandmotors-power-supply-24v-36v-48v 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/power_20supply200.jpg?v=1730083918 Power Supply Tumbnail: https://www.newbiehack.com/products/electronicsandmotors-nema17-62ozin-newbiehack-motors-stepping_motor-62_ozin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-09-03_20184450-800_e288cc6e-8ff2-4efe-85c7-c9696dccd878.jpg?v=1730083923 NEMA 17 CNC Motor (84 oz-in 5mm shaft) 1.68 Amps 84 oz-in NEMA 17 Stepping motors (also called stepper motor) https://www.newbiehack.com/products/electronicsandmotors-nema24-425ozin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20180910_133451_Bokeh-800.jpg?v=1730083929 NEMA 23 Stepper Motor (425 oz-in 1/4" dual shaft) 2.8 Amps Full view of the 425 oz-in nema 23 24 stepper motor https://www.newbiehack.com/products/electronicsandmotors-nema34-651ozin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-09-03_20161037-800.jpg?v=1730083934 NEMA 34 Stepper Motor (679 oz-in 14mm single shaft) 6 Amps NEMA 34 679 oz-in stepper motor main image https://www.newbiehack.com/products/electronicsandmotors-stepper-driver-3-0a 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_2024-12-19_175606.png?v=1734649026 Motor Driver 18-50V DC Up to 4.2 amps 400 to 25000 Steps/Revolution https://www.newbiehack.com/products/electronicsandmotors-stepper-driver-6-0a 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/StepDriver6amp.jpg?v=1730083944 Motor Driver (24-70 volts DC, up to 5.6 amps, microstepping from 1/2 to 1/125) Tumbnail: https://www.newbiehack.com/products/electronicsandmotors-parallel-breakout-relay 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/breakoutboardwwires.jpg?v=1735513767 Breakout Board with Relay Breakout Board https://www.newbiehack.com/products/3d-printer-component-electronicsandmotors-3d-printer-mainboard-fdmelectronics-3dprintermainboard 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/3dprintermainboard200.jpg?v=1730083971 3D Printer Main Board Tumbnail: https://www.newbiehack.com/products/3d-printer-component-electronicsandmotors-extruder-controller-fdmelectronics 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/extrudercontroller200.jpg?v=1730083973 Extruder Controller Tumbnail: https://www.newbiehack.com/products/3d-printer-component-electronicsandmotors-electronic-component-arduino-mega-2560-fdmelectronics 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/arduinomega2560-200.jpg?v=1730083975 Arduino Mega 2560 Tumbnail: https://www.newbiehack.com/products/electronicsandmotors-electronic-component-e-stop-button-switch-safety 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/E-stop_20120v10a200.jpg?v=1730083986 E-Stop (Emergency Stop) Button - 120v-10A/240v-6A Tumbnail: https://www.newbiehack.com/products/electronicsandmotors-electronic-component-limit-switch-safety-mechanical-snap-action-15a 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/limit_20switch_20medium.jpg?v=1730083991 Limit Switch Tumbnail: https://www.newbiehack.com/products/electronicsandmotors-electronic-component-tester-led 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/testerLED1-200.jpg?v=1730083996 Tiny 5 Volt Tester LED https://www.newbiehack.com/products/electronicsandmotors-cable-wire-20awg-wrcon 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_2025-01-01_163716.png?v=1735768438 Motion 18 AWG Cable - Multiple Conductors https://www.newbiehack.com/products/electronicsandmotors-cable-wire-db25-male-male 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/parallel_20cable_20200.jpg?v=1730084005 DB25 Male to DB25 Male Parallel Cable (10 FT) https://www.newbiehack.com/products/electronicsandmotors-cable-wire-db25-male-female 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/parallelcablemaletofrmale200.jpg?v=1730084007 DB25 Male to DB25 Female Parallel Cable Tumbnail: https://www.newbiehack.com/products/control-software-mach3 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Box-Mach3-800.jpg?v=1730084010 Mach3 CNC Control Software Mach3 CNC Control Software for Windows 32-bit systems. https://www.newbiehack.com/products/cam-software-cambam 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/cambam-beta0.8.0.jpg?v=1730084013 CAMBAM CAD and CAM Design Software Order CAMBAM Now: Inexpensive CAM software perfect for DIY and Industrial CNC applications. Licenses emailed FAST directly to your inbox. https://www.newbiehack.com/products/spindle-inverter-1-5kw-vfd-spindle 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/spindleandinverter1-5-200.jpg?v=1730084016 1.5 kW (kilowatt) Water Cooled Spindle with Inverter (VFD) https://www.newbiehack.com/products/spindle-inverter-1-5kw-spindle-novfd 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/spindle1-5-200.jpg?v=1730084019 1.5 kW (kilowatt) Water Cooled Spindle https://www.newbiehack.com/products/spindle-inverter-1-5kw-vfd-nospindle 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/inverter-1-5-2-2-200.jpg?v=1730084022 1.5 kW (kilowatt) Inverter (Variable Frequency Drive - VFD) https://www.newbiehack.com/products/spindle-inverter-2-2kw-spindle-vfd 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0232-800.jpg?v=1730084026 2.2 kW (kilowatt) Water Cooled Spindle with Inverter (VFD) 2.2kw Spindle with Inverter or VFD (Variable Frequency Drive) https://www.newbiehack.com/products/spindle-inverter-2-2kw-spindle-novfd 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0235-800.jpg?v=1730084042 2.2 kW (kilowatt) Water Cooled Spindle 2.2KW Spindle https://www.newbiehack.com/products/spindle-inverter-2-2kw-vfd-nospindle 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0241-800.jpg?v=1730084053 2.2 kW (kilowatt) Inverter (Variable Frequency Drive - VFD) VFD (Inverter) for 2.2kW Spindle https://www.newbiehack.com/products/spindle-collet-5-er20-spindle-collet 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/collet.5inch-200.jpg?v=1730084056 1/2" ER20 Collet for Spindles https://www.newbiehack.com/products/spindle-collet-25-er20-spindle-collet 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/collet.25inch-200.jpg?v=1730084059 1/4" ER20 Collet for Spindles https://www.newbiehack.com/products/spindle-collet-125-er20-spindle-collet 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/collet.125inch-200.jpg?v=1730084061 1/8" ER20 Collet for Spindles https://www.newbiehack.com/products/router-collet-5-er20-router-collet-colletorkit 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/pc_20collet_201-2_20200.jpg?v=1730084063 1/2" ER20 Router Collet Tumbnail: https://www.newbiehack.com/products/router-collet-25-er20-router-collet-colletorkit 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/pc_20collet_201-4_20200.jpg?v=1730084064 1/4" ER20 Router Collet Tumbnail: https://www.newbiehack.com/products/router-collet-125-er20-router-collet-colletorkit 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/pc_20collet_201-8_20200.jpg?v=1730084066 1/8" ER20 Router Collet Tumbnail: https://www.newbiehack.com/products/router-colletnut-router-collet-nut-nutorspanner 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/pc_20collet_20nut_20200.jpg?v=1730084067 Collet Nut for Router Collets Tumbnail: https://www.newbiehack.com/products/router-colletnut-er20-router-spanner-wrench-nutorspanner 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Spanner_20wrench_20200.jpg?v=1730084069 Spanner Wrench for Router Collet Nut Tumbnail: https://www.newbiehack.com/products/router-collet-er20-router-complete-collet-kit-colletorkit 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/PC_20Collet_20Kit_20200.jpg?v=1730084071 Complete Router Collet Kit https://www.newbiehack.com/products/strip-brush 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_5550_200px.jpg?v=1730084073 2" Flexible Strip Brush (Great for making dust shoes for the router or spindle) Tumbnail: image of the 2 inch strip brush for the dust shoe for CNC Machines and CNC Routers https://www.newbiehack.com/products/endmill-compression-onsrud-25-cut-2-flute 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/onsrudcompression-2-.25x.875-200.jpg?v=1730084075 Onsrud 1/4" Cut Diameter Two Flute Compression End Mill for Wood and Laminated Wood https://www.newbiehack.com/products/endmill-singleflute-upcut-onsrud-1-flute-plastic-wood-aluminum 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_5695_200px.jpg?v=1730084078 Onsrud 1/4" Cut Diameter Single Flute for Plastic, Wood, Aluminum and Solid Surface Cutting End Mill https://www.newbiehack.com/products/endmill-surfacing-cutter-onsrud-2-insert 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Onsrud2.5-200-2.jpg?v=1730084081 Onsrud Spoilboard Surfacing Cutter Tumbnail: https://www.newbiehack.com/products/endmill-singleflute-upcut-25-1-flute-plastic-wood 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/singleFLute-.25X1inX.25X3in.jpg?v=1730084082 1/4" Cut Diameter Single Flute End Mill for Plastic and Wood Cutting Tumbnail: https://www.newbiehack.com/products/endmill-singleflute-upcut-125-1-flute 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/singleFLute-.125x.75inx.25x2.5in.jpg?v=1730084085 1/8" Cut Diameter Single Flute End Mills for Plastic and Wood Cutting Tumbnail: https://www.newbiehack.com/products/endmill-twoflute-upcut-25-2-flute-1-125-cutlength 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/1-4_20inch_20general_20purpose_20200.jpg?v=1730084086 General Purpose End Mill: Cut Length 1-1/8", 1/4" Diameter Tumbnail: https://www.newbiehack.com/products/endmill-pcb-etching-upcut-60-degree-nozrn-carveandengrave 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/etching_20bit_2030_20degree_20200.jpg?v=1730084089 Engraving and PCB Isolation Routing End Mill with 60 Degree Tip Tumbnail: https://www.newbiehack.com/products/endmill-3dcarving-upcut-0625tip-carveandengrave 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/carving_20end_20mill_20200.jpg?v=1730084090 3D Carving End Mill with 1/16" Tip Tumbnail: https://www.newbiehack.com/products/endmill-3dcarving-upcut-03125tip-carveandengrave 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/edcarving1-32-300.jpg?v=1730084092 3D Carving End Mill with 1/32" Tip Tumbnail: https://www.newbiehack.com/products/mechanical-leadscrews-lead-screw-5-5-starts-10-tpi 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/mechanical-leadscrews-lead-screw-_5-5-starts-10-tpi_1588-800.jpg?v=1730084096 1/2" Lead Screw (2 turns per inch) The end of the 1/2" lead screw and the 5 starts can be seen clearly https://www.newbiehack.com/products/mechanical-leadscrews-lead-screw-375-2-starts-10-tpi 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/threeeightsinchantibacklashnutmountingdatasheet.jpg?v=1730084101 3/8" Lead Screw (5 turns per inch) Datasheet for the 3/8" antibacklash nut mount https://www.newbiehack.com/products/mechanical-idler-sprockets-ansi25-20-teeth-sprocchn 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/idler_20sprocket-25_20200.jpg?v=1730084103 #25 Idler Sprocket Tumbnail: https://www.newbiehack.com/products/mechanical-drive-sprockets-ansi25-9-teeth-sprocchn 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/drive_20sprocket-25_20200.jpg?v=1730084104 #25 Drive Sprocket - 1/4" and 5/16" Bores Tumbnail: https://www.newbiehack.com/products/mechanical-drive-sprockets-ansi25-5-bore-14-teeth-sprocchn 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/sprocket-one-half-ID-14-teeth-200.jpg?v=1730084106 #25 Drive Sprocket - 1/2" Bore Tumbnail: https://www.newbiehack.com/products/mechanical-roller-chains-ansi25-sprocchn 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Roller_20Chain_2025_20-_20200.jpg?v=1730084107 #25 Roller Chain Tumbnail: https://www.newbiehack.com/products/mechanical-drive-sprockets-ansi40-9-teeth-sprocchn 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/No40DriveSprocket_1-800.jpg?v=1730084110 #40 Drive Sprocket number 40 drive sprocket https://www.newbiehack.com/products/mechanical-idler-sprockets-ansi40-17-teeth-sprocchn 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Idler_20Sprocket_20with_20bolt_20200.jpg?v=1730084112 #40 Idler Sprocket Tumbnail: https://www.newbiehack.com/products/mechanical-roller-chains-ansi40-sprocchn 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/roller_20chain_20200.jpg?v=1730084113 #40 Roller Chain Tumbnail: https://www.newbiehack.com/products/mechanical-collars-leadscrews-leadnuts 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/collars_201-2_20200.jpg?v=1730084115 Collars Tumbnail: https://www.newbiehack.com/products/mechanical-drive-pulley-14-teeth-2-pitch 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/timing_20belt_20and_20pulley_20100.jpg?v=1730084116 XL 14 Teeth .2" Pitch Drive Pulley Tumbnail: https://www.newbiehack.com/products/mechanical-timing-belt-2-pitch-pulley 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/timing_20belt_20100.jpg?v=1730084118 XL .2" Pitch Timing Belt Tumbnail: https://www.newbiehack.com/products/mechanical-drive-pulley-08-pitch-20-teeth-mxl 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/mxl-drive-pulley-20t-200.jpg?v=1730084121 MXL 20 Teeth .08" Pitch Drive Pulley https://www.newbiehack.com/products/mechanical-timing-belt-08-pitch-mxl-pulley 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/mxl-timing-belt-.25inchwidth-200.jpg?v=1730084123 MXL .08" Pitch Timing Belt 1/4" Wide https://www.newbiehack.com/products/hardware-cross-dowel-standardnut 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/cross_20dowel_20100.jpg?v=1730084125 1/4" Cross Dowels Tumbnail: https://www.newbiehack.com/products/cable-carrier-2x-75-cablecarrier 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/cablecarrier2inch-4-200.jpg?v=1730084131 Cable Carrier - Inside Dimension 2 inches by .75 inches cable carrier 2x.75 inside dimension https://www.newbiehack.com/products/cable-carrier-bracket-2x-75-cablecarrier 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/cablecarrier2inch-5-200.jpg?v=1730084136 Cable Carrier Bracket for Cable Carriers of Inside Dimension 2 inches by .75 inches Cable carrier end mounting bracket for the 2"x.75" cable carrier https://www.newbiehack.com/products/cable-carrier-1x-75-cablecarrier 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/cablecarrier1inch-4-200.jpg?v=1730084145 Cable Carrier - Inside Dimension 1 inch by .75 inches cable carrier 2x.75 inside dimension https://www.newbiehack.com/products/cable-carrier-bracket-1x-75-cablecarrier 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/cablecarrier1inch-5-200.jpg?v=1730084150 Cable Carrier Bracket for carriers of Inside Dimension 1 inches by .75 inches https://www.newbiehack.com/products/cnc-computer-system-redsprout 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_5378.jpg?v=1730084163 The redSprout CNC Electronics and Computer Plug-and-Play System Tumbnail: Front view where the stepper motor drivers can be seen https://www.newbiehack.com/products/cnc-computer-system-redleaf 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/READLEAF_1-800.jpg?v=1730084173 The redLeaf CNC Electronics and Computer Plug-and-Play System Thumbnail: redLeaf Computer System https://www.newbiehack.com/products/sub-assemblies-z-axis-assemblies-assembly-blacktoe-blackfoot 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/blackToe_20890_20Z-axis_20Assembly.jpg?v=1730084176 Partial Machine Assembly: Z-Axis for the blackToe and blackFoot CNC Machine Kits Version 4.3 Tumbnail: https://www.newbiehack.com/products/cnc-machine-bluechick-v4-milling 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/blueChick2.jpg?v=1730084298 12"x36" CNC Router Kit https://www.newbiehack.com/products/cnc-machine-blacktoe-v4-2x4-milling 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/blackToe_204-0_201_20300.jpg?v=1730084318 2'x4' CNC Router Kit https://www.newbiehack.com/products/cnc-machine-optional-table-2x4-v4 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/blackToeOptionalTable-300.jpg?v=1730084320 Optional Table for 2'x4' CNC Router Kit (blackToe) Tumbnail: https://www.newbiehack.com/products/cnc-machine-blackfoot-v4-milling 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/blackFoot_204-3_20without_20table_20exploded_20top-300.jpg?v=1730084471 4'x8' CNC Machine (blackFoot) Exploded view of the blackFoot CNC Machine https://www.newbiehack.com/products/cnc-machine-greenbull-v4-5x-milling 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/overall-300-800.jpg?v=1730084493 5'x10' Heavy Duty CNC Machine (greenBull 5X) Overall view of the greenBull cnc router https://www.newbiehack.com/products/cnc-machine-redfrog-v1-pick-and-place-machine 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/redfrog2-300.jpg?v=1730084498 redFrog Pick and Place Machine - Priced for the Hobbyist and Totally Hackable Tumbnail: https://www.newbiehack.com/products/cnc-machine-scratchbuild 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/hardware_20and_20plans_20medium.jpg?v=1730084505 CNC Machine Hardware and Plans https://www.newbiehack.com/products/cnc-machine-blacktooth-laser-cutter-engraver-40w 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/blacktoothv2-800.jpg?v=1730084629 blackToothv2 40W CO2 Laser Cutter and Engraver Tumbnail: blackTooth laser cutter and engraver https://www.newbiehack.com/products/newbiehack-microcontroller-avr-atmega 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Atmega324_20200_1.jpg?v=1730692238 Atmel Atmega324 AVR Microcontroller https://www.newbiehack.com/products/newbiehack-lcd_displays_and_leds-lcd-20x4 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9528-800.jpg?v=1730084645 20x4 LCD (Liquid Crystal Display) I2C version of the 20x4 LCD display https://www.newbiehack.com/products/newbiehack-potentiometers-trimmer-10k 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/10k_20pot_20200.jpg?v=1730084648 10K Trimmer Potentiometer (Through Hole) 10K trimmer potentiometer https://www.newbiehack.com/products/newbiehack-lcd_displays_and_leds-lcd-16x2 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/16x2LCD-800.jpg?v=1730084652 16x2 LCD (Liquid Crystal Display) 16x2 LCD (Liquid Crystal Display) https://www.newbiehack.com/products/newbiehack-prototyping-breadboard-opaque-white 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/white_20breadboard_20100.jpg?v=1730084656 White Prototyping Breadboard White prototyping breadboard with 30 tie strips and two power rails on each side. https://www.newbiehack.com/products/newbiehack-prototyping-breadboard-transparent-clear 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/clear_20breadboard_20100.jpg?v=1730084659 Clear Prototyping Breadboard Clear Semi Transparent Breadboard https://www.newbiehack.com/products/newbiehack-lcd_displays_and_leds-led-red 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/red_20LED_20100.jpg?v=1730084662 Red Through Hole LED (Light Emitting Diode) Red Through Hole LED (Light emitting diode) https://www.newbiehack.com/products/newbiehack-lcd_displays_and_leds-led-green 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/green_20LED_20100.jpg?v=1730084665 Green Through Hole LED (Light Emitting Diode) Green through hole LED (light emitting diode) https://www.newbiehack.com/products/newbiehack-lcd_displays_and_leds-led-yellow 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/yellow_20LED_20100.jpg?v=1730084668 Yellow Through Hole LED (Light Emitting Diode) Yellow through hole LED (light emitting diode) https://www.newbiehack.com/products/newbiehack-resistors-330-ohm 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/330ohm_20resistor_20100.jpg?v=1730084671 330 Ohm Through Hole Resistor 330 ohm metal film resistor https://www.newbiehack.com/products/newbiehack-capacitors-100nf-50v-through_hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/point1uf_20capacitor_20100.jpg?v=1730084673 .1uF (100nF) Through Hole Ceramic Capacitor .1uf (100nf) ceramic capacitor https://www.newbiehack.com/products/newbiehack-potentiometers-trimmer-20k 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/20k_20pot_20100.jpg?v=1730084677 20K Through Hole Trimmer Potentiometer 20k trimmer potentiometer https://www.newbiehack.com/products/newbiehack-capacitors-10uf-16v-through_hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/10uf25v_20capacitor_20100.jpg?v=1730084680 10uF Through Hole Electrolytic Capacitor 10uF Through Hole Electrolytic Capacitor https://www.newbiehack.com/products/bearing-1875-v-groove 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/small-v-groove-100.jpg?v=1730084683 V-Groove Bearings 3/16 inch ID Small v-groove bearing https://www.newbiehack.com/products/development-stepper-driver-l297-l6203 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/driver_20board_20top_201.jpg?v=1730084688 4A RMS Stepper Driver PCB Explanation (L6203/L297) Stepper Driver PCB Top (L6203/L297) https://www.newbiehack.com/products/development-stepper-driver-a3979 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/earlycircuit.jpg?v=1730084691 Initial A3979 Stepper Driver Development Image of Schematic for A3979 Driver https://www.newbiehack.com/products/3d-printer-component-extruder 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Extruder1-800.jpg?v=1730084717 3D Printer Extruder Extruder for 3D Printing https://www.newbiehack.com/products/3d-printer-component-molex-connector-crimp-pins-wrcon-newbiehack-connectors-female-3-96pitch-molex 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/molex4pinwithcrimp-300.jpg?v=1730084722 4 Pin Female Molex Connector with Crimp Pins Molex connector and crimp pins 3.96mm pitch spacing https://www.newbiehack.com/products/laser-component-20mm-lens-2-inch-50-80mm 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/76_20mmCO2Lens-300.jpg?v=1730084725 CO2 Laser Lens 50.80mm (2 inch) Focal Length 50.80mm Focal Length CO2 Lens 20mm diameter https://www.newbiehack.com/products/laser-component-power-supply-co2-40w 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/40WLASERPSU1-800.jpg?v=1730084728 40 Watt Laser Tube Power Supply 40W CO2 Laser Power Supply https://www.newbiehack.com/products/laser-component-laser-tube-co2-40watt 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/40WattC02LaserBulb-300.jpg?v=1730084732 40 Watt CO2 Laser Tube 40 Watt CO2 Laser Tube https://www.newbiehack.com/products/laser-component-nozzle-20mm-lens-mirror 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/laserNozzle-300.jpg?v=1730084736 Laser Nozzle (Final Mirror and Lens Mount) Laser Lens and mirror mount (nozzle) https://www.newbiehack.com/products/laser-component-mirror-mount-20mm 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/mirrorMount-300.jpg?v=1730084740 Laser Mirror Mount for 20mm and 25mm Mirrors Mirror Mount for 20mm Mirrors https://www.newbiehack.com/products/laser-component-20mm-mirror-25mm 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/20mmMirror.jpg?v=1730084743 20mm and 25mm Laser Mirror Gold Plated 20mm Laser Mirror https://www.newbiehack.com/products/3d-printer-component-connector-female-2-54-pitch-newbiehack-connectors-female-2-54pitch-wrcon 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/3position2.54pitchfemaleheader-300.jpg?v=1730084746 2.54mm (0.1") Pitch Female Connector 3 Position 3 position female connector with 2.54mm pitch https://www.newbiehack.com/products/3d-printer-component-cnc-electronicsandmotors-cable-wire-3-conductor-22-awg-wrcon-cablewire3conductor22awg 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/3conductor22AWGCable-300.jpg?v=1730084748 3 Conductor 22 AWG Unshielded Cable 3 conductor stranded 22 awg cable unshielded https://www.newbiehack.com/products/cnc-depreciated-machine-v1-2-assembly-videos 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/depreciatedCNCv1_2-300.png?v=1730084752 CNC v1.2 Assembly: Stepper Drivers, Motors, and Power CNC Machine Depreciated Version 1.2 https://www.newbiehack.com/products/cnc-depreciated-machine-v1-3 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/kit_201.3_204_20large.jpg?v=1730084757 CNC Routing Machine Kit Version 1.3 Depreciated CNC Machine Version 1.3 https://www.newbiehack.com/products/cnc-depreciated-machine-v2-0 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/blacktoe1M.jpg?v=1730084761 CNC Router Kit Version 2.0: blackToe blackToe 2.0 front view of z-axis https://www.newbiehack.com/products/cnc-depreciated-machine-4x8-v2-0 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/blackToe4x8_20side.jpg?v=1730084764 CNC Router Kit Version 2.2:Blacktoe 4'x8' view from the right side of the gantry of the blackToe 4x8 cnc machine https://www.newbiehack.com/products/electronicsandmotors-pneumatic-hydraulic-vacuum-pump-controller-sensor-redfrog-v1 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/vacuum-controller-5v-power-terminal-700.jpg?v=1730084775 Vacuum Regulator Pump Controller 5v power terminal for the vacuum pressure controller. https://www.newbiehack.com/products/newbiehack-capacitors-100uf-50v-through_hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/cap-100uf-th-300.jpg?v=1730084778 100uF/50v Electrolytic Capacitor 100uF 50v through hole aluminum electrolytic capacitor https://www.newbiehack.com/products/cnc-machine-3d-printer-whiteant-fdm 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/whiteant.jpg?v=1730084780 whiteAnt 3D Plastic Printer/CNC Machine - Build Objects of 160mm x 190mm x 125mm whiteAnt 3d printer https://www.newbiehack.com/products/electronicsandmotors-connector-round-male-4pin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/roundmaleconnector1.jpg?v=1730084783 4 Pin Round Male Connector 4 Pin Round Male Connector https://www.newbiehack.com/products/electronicsandmotors-connector-round-female-4pin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/roundconnectorfemale1.jpg?v=1730084789 4 Pin Round Female Connector 4 Pin Round Female Connector https://www.newbiehack.com/products/electronicsandmotors-connector-round-female-male-4pin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/roundmaleandfemaleconnector.jpg?v=1730084793 4 Pin Round Female and Male Connector Set 4 Pin Round Male and Female Connectors https://www.newbiehack.com/products/redfrog-v1-vacuum-nozzle-pneumatic-hydraulic 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/vacuumpickupnozzle.jpg?v=1730084795 Vacuum Nozzle and Cups for SMD Pick and Place https://www.newbiehack.com/products/hardware-machine-screw-4-40-threequartersscrew 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/screwno4-40threequarterslength.jpg?v=1730084798 #4-40 x 3/4" Machine Screw #4 machine screw at 3/4" length https://www.newbiehack.com/products/hardware-machine-screw-25dia-2inchlength 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/screw-quarterinchx2andonehalfinch.jpg?v=1730084803 1/4" x 2 1/2" Machine Screw 2-1/2 inch x 1/4 inch UNC 20 TPI Screw https://www.newbiehack.com/products/hardware-machine-screw-25dia-1-5inchlength 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/quarterinchby1andahalfinch.jpg?v=1730084807 1/4" x 1 1/2" Machine Screw 1/4" x 1 1/2" UNC Machine Screw 20 TPI https://www.newbiehack.com/products/hardware-machine-screw-25dia-1inchlength 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/quarterinchbyoneinchmscrew.jpg?v=1730084809 1/4" x 1" Machine Screw 1/4 inch x 1 inch UNC 20 TPI https://www.newbiehack.com/products/hardware-machine-screw-flathead-25dia-1-5inchlength 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/quarterinchscrewflatheadonenadahalfinch.jpg?v=1730084812 1/4" x 1 1/2" Flat Head Machine Screw 1/4 inch x 1 1/2 inch UNC 20 TPI Flat Head https://www.newbiehack.com/products/hardware-4-nut-machine-hex-standardnut 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/numberfournut.jpg?v=1730084815 #4 Hex Nut Number 4 nut https://www.newbiehack.com/products/hardware-nut-quarterinch-hex-standardnut 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/quarterinchnut.jpg?v=1730084818 1/4" Hex Nut 1/4 inch Machine Hex Nut https://www.newbiehack.com/products/electronicsandmotors-nema23-100ozin-newbiehack-motors-stepping_motors-100_ozin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-09-03_20180552-800.jpg?v=1730084821 NEMA 23 Stepper Motor (100 oz-in) 3.0 Amps NEMA 23 Stepping Motor 1.2Nm https://www.newbiehack.com/products/laser-components-goggles-safety-honeywell 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/lasergoogles-800.jpg?v=1730084823 Honeywell Laser CO2 Goggles Laser CO2 Goggles https://www.newbiehack.com/products/cam-software-artcam 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/artcam_express_logo-800.jpg?v=1730084832 Delcam ArtCAM CADCAM Software Artcam main image https://www.newbiehack.com/products/cnc-machine-greenlean-v1-milling 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/iso_20greenlean-300.jpg?v=1730084996 4'x8' Vertically Oriented CNC Machine (greenLean) v2 Isometric view of the greenLean cnc machine https://www.newbiehack.com/products/pneumatic-hydraulic-silicone-tubing 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/silicone_20tubing.jpg?v=1730085010 Silicone Tubing silicone tubing https://www.newbiehack.com/products/interfaces-newbiehack-interfaces-ttl232r-usb-uart-serial 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9820-800.jpg?v=1730085019 FTDI TTL-232R 5V USB to UART (Serial) Converter Back view of USB to Serial Converter https://www.newbiehack.com/products/newbiehack-crystal_oscillators-18432000-hz 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/crystal18432000-300.jpg?v=1730085023 18.432 MHz Quartz Crystal Oscillator Crystal Oscillator 18.432 MHz for UART https://www.newbiehack.com/products/endmill-twoflute-chipbreaker-finisher-onsrud-2-flute-downcut-three-eighths 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/onsrud_2060-950-300-1.jpg?v=1730085026 Onsrud ChipBreaker/Finisher Two Flute Down Cut End Mill for Wood and Wood Composites Onsrud 60-950 Chipbreaker finisher end mill https://www.newbiehack.com/products/pneumatic-hydraulic-vacuum-pump-3cfm-onestage 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/vacuumpump1-100.jpg?v=1730085030 Vacuum Pump - 3 CFM thumbnail: 3 cfm vacuum pump single stage https://www.newbiehack.com/products/endmill-twoflute-chipbreaker-finisher-onsrud-2-flute-upcut 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/chipbreaker-upcut-onehalf-300.jpg?v=1730085033 Onsrud ChipBreaker/Finisher Two Flute Up Cut End Mill for Wood and Wood Composites chipbreaker/finisher end mill up cut double flute https://www.newbiehack.com/products/newbiehack-voltage_regulators-5v 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/max603-300.jpg?v=1730085037 Low Dropout Regulators MAX603 Voltage Regulator https://www.newbiehack.com/products/newbiehack-capacitors-22pf-200v-through_hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/capacitor-22pf-300.jpg?v=1730085041 22pF (.022nF or .000022uF) Through Hole Ceramic Capacitor for Crystal Oscillators 22 pF Capacitor https://www.newbiehack.com/products/newbiehack-crystal_oscillators-16000000-hz 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/crystal-16mhz-20pf-300.jpg?v=1730085044 16 MHz Quartz Crystal Oscillator Crystal Quartz Oscillator - 16 MHz https://www.newbiehack.com/products/newbiehack-input_devices-4x4keypad-inputdevice 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/4x4KeyPad1-300.jpg?v=1730085050 4x4 Keypad with Adhesive Backing 4x4 keypad top view https://www.newbiehack.com/products/newbiehack-integrated_circuits-buffer-quad-buffer-line-driver-throughhole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2024-12-29182609.png?v=1735514788 Quad Buffer Line Driver 74HC126E 14-Pin DIP https://www.newbiehack.com/products/mechanical-rails-aluminum-6061-75x-75x-125 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/threeqaurterXthreequarterXoneeigth-aluminum-rail-1-300.jpg?v=1730085061 3/4 x 3/4 x 1/8 Aluminum Rail 3/4 x 3/4 x 1/8 Aluminum Rails 6061 https://www.newbiehack.com/products/newbiehack-resistors-10k-ohm-quarterwatt-through-hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/resistor-10k-quarterwatt-300.jpg?v=1730085065 10K Ohm 1/4 Watt Through Hole Resistor 10K through hole 1/4 watt resistor https://www.newbiehack.com/products/cable-carrier-7x-6-cablecarrier 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/cableCarrier-_7x_6-300.jpg?v=1730085072 0.7" x 0.6" Inside Dimension Cable Carrier .7 x .6 inside dimension cable carrier https://www.newbiehack.com/products/cable-carrier-cablecarrier-brackets-7x-6 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/cableCarrier-brackets-_7x_6-300.jpg?v=1730085076 0.7" x 0.6" Cable Carrier Bracket Set Bracket Set for the 0.7" x 0.6" cable carrier https://www.newbiehack.com/products/cable-carrier-cablecarrier-1x-87 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/cableCarrier-yellowpin-1x_87-300.jpg?v=1730085080 1" x 0.87" Inside Dimension Cable Carrier 1.0" x 0.87" Inside dimension cable carrier https://www.newbiehack.com/products/cable-carrier-cablecarrier-brackets-1x-87 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/cableCarrier-yellowpin-1x_87-brackets-300.jpg?v=1730085083 1" x 0.87" Cable Carrier Bracket Set 1" x 0.87" Cable carrier bracket set https://www.newbiehack.com/products/cable-carrier-cablecarrier-2x-87 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/cableCarrier-2x_87-yellowpin-300.jpg?v=1730085087 2" x 0.87" Inside Dimension Cable Carrier 2" x 0.87" Inside Dimension Cable Carrier https://www.newbiehack.com/products/cable-carrier-cablecarrier-brackets-2x-87 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/cableCarrier-brackets-2x_87-yellowpin-300.jpg?v=1730085091 2" x 0.87" Cable Carrier Bracket Set Bracket Set for 2" x 0.87" Cable Carrier https://www.newbiehack.com/products/newbiehack-prototyping-jumper-wires-flexible-male-65pc-bundle 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/JumperWire2-300.jpg?v=1730085097 Flexible Jumper Wires Male to Male 65 Piece Bundle A bundle of 65 jumper wires of various length and color. Bound together with the male connectors shown in the foreground. https://www.newbiehack.com/products/newbiehack-sensors-accelerometers-16g-adxl345breakout 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9565-800.jpg?v=1730085104 Accelerometer ADXL 345 Breakout Board with I2C and SPI Interface ADXL 345 Accelerometer breakout with headers https://www.newbiehack.com/products/hardware-washers-375-shim-forbearings 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/3-8inchShimWasherForBearings1-800.jpg?v=1730085116 3/8" Shim Washer For Bearings (.39"x.625"x.06") 1 3/8" Shim Washer for Bearings https://www.newbiehack.com/products/newbiehack-prototyping-breadboard-mini-breadboard-17x100-black 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/TinyBreadboard17X10SingleBlack-800.jpg?v=1730085124 Mini Prototyping Breadboard Self Adhesive - Black A single mini breadboard 17X10. Black color. https://www.newbiehack.com/products/newbiehack-prototyping-breadboard-mini-breadboard-17x100-white 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/TinyBreadboard17X10SingleWhite-800.jpg?v=1730085131 Mini Prototyping Breadboard Self Adhesive - White Single White 17X10 mini breadboard https://www.newbiehack.com/products/newbiehack-prototyping-breadboard-mini-breadboard-17x100-blue 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/TinyBreadboard17X10SingleBlue-800.jpg?v=1730085138 Mini Prototyping Breadboard Self Adhesive - Blue Single Blue 17x10 Mini Breadboard https://www.newbiehack.com/products/newbiehack-prototyping-breadboard-mini-breadboard-17x100-red 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/TinyBreadboard17x10SingleRed-800.jpg?v=1730085145 Mini Prototyping Breadboard Self Adhesive - Red A single 17x10 mini breadboard (Red) https://www.newbiehack.com/products/newbiehack-prototyping-breadboard-mini-breadboard-17x100-green 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/TinyBreadboard17x10SingleGreen-800.jpg?v=1730085153 Mini Prototyping Breadboard Self Adhesive - Green Single Green Mini Breadboard https://www.newbiehack.com/products/laser-component-potentiometer-50k-newbiehack-potentiometers-potentiometer-50k-panel-mount 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/50kPotentiometerPCMount1-800.jpg?v=1730085159 50K Potentiometer Panel Mount (Non Trimmer) 50K Potentiometer Panel Mount https://www.newbiehack.com/products/pneumatic-hydraulic-tube-fitting-barbed-to-male 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Tube_20Fitting_2014barbed_20to_20Male_2014_20NPT_201-800.jpg?v=1730085164 Tube Fitting 1/4" Barbed to Male 1/4" NPT 1/4" barbed to 1/4" NPT tube fitting https://www.newbiehack.com/products/pneumatic-hydraulic-tube-fitting-female-to-male 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Tube_20Fitting_2014_20NPT_20Female_20Inside_20Thread_20to_2012_20NPT_20Male_20Outside_20Thread1-800.jpg?v=1730085168 Tube Fitting 1/4" NPT Female Inside Thread to 1/2" NPT Male Outside Thread Tube Fitting 1/4" NPT Female Inside Thread to 1/2" NPT Male Outside Thread https://www.newbiehack.com/products/laser-component-potentiometer-black-red-cap-knob-newbiehack-potentiometers-black-red-cap-knob 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/PotKnobRedSmall2-800.jpg?v=1730085174 Small Knob for Potentiometer - Black with Red Cap Small red knob for potentiometer https://www.newbiehack.com/products/laser-component-potentiometer-50k-with-knob-newbiehack-potentiometers-potentiometer-50k-panel-mount-with-knob 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/PotKnobRedSmall1-800.jpg?v=1730085178 50K Potentiometer Panel Mount (Non Trimmer) With Knob Potentiometer with adjustable knob. https://www.newbiehack.com/products/electronicsandmotors-cable-wire-usb-cable-typea-male-to-typea-male-newbiehack-cables_and_wires-usb-cable-typea-male-to-typea-male 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/USBCable3FTmaletomale1-800.jpg?v=1730085180 USB Cable Type A Male to USB Type A Male - 3 FT 3 Foot USB Cable Type A to USB Cable Type A https://www.newbiehack.com/products/electronicsandmotors-cable-wire-usb-2-0-cable-typea-male-to-typeb-male-newbiehack-cables_and_wires-usb-2-0-cable-typea-male-to-typeb-male 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/USBCable10FTMaleAtoMaleB1-800.jpg?v=1730085181 USB 2.0 Cable Type A Male to Type B Male - 10 FT USB 2.0 Cable 10 Foot Type A Male to Type B Male https://www.newbiehack.com/products/newbiehack-prototyping-jumper-wires-140pc-14lengths-multicolor 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/JumperWire140PC14XLengths1-800.jpg?v=1730085186 Jumper Wire Pack 140 Pieces Multi-Size Multi-Color 140 piece multi-color multi-size jumper wires for breadboarding. https://www.newbiehack.com/products/newbiehack-sensors-ultrasonic-range-finder-distance-measuring-sensor 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/UltraSonicDistanceMeasurementRF1-800.jpg?v=1730085192 Ultrasonic Range Finder - Distance Measuring Transducer Sensor Ultrasonic Distance Measuring Range Finder https://www.newbiehack.com/products/laser-component-potentiometer-5k-rotary-newbiehack-potentiometers-potentiometer-5k-rotary 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/5kPoteniometerRotary2-800.jpg?v=1730085197 5K Potentiometer Panel Mount A 5K Rotary Potentiometer shown with a pencil for scale. https://www.newbiehack.com/products/3d-printer-component-typek-thermocouple-heat-sensor-newbiehack-sensors-typek-thermocouple-heat-sensor 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/TypeKThermocouple1-800.jpg?v=1730085200 Type K Thermocouple Temperature Sensor Type K Thermocouple Temperature Sensor https://www.newbiehack.com/products/mechanical-roller-chains-ansi25-link 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/RollerChainLink25_1-800.jpg?v=1730085201 #25 Roller Chain Link #25 Roller Chain Links with pencil in background for scale. https://www.newbiehack.com/products/mechanical-roller-chains-ansi40-link 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/RollerChainLink40_1-800.jpg?v=1730085203 #40 Roller Chain Link Roller Chain Link #40 shown with a pencil tip for scale. https://www.newbiehack.com/products/newbiehack-development_tools-mechanical-drafting-pencil 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/mechanicalDraftingPencil1-800.jpg?v=1730085205 Mechanical Drafting Pencil - 5mm Mechanical Drafting Pencil https://www.newbiehack.com/products/electronicsandmotors-3axis-62-elcombo 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/3axiscombo_62oz_1-800.jpg?v=1730085206 3 Axis Electronics Combo (Small Motors) 3 Axis Electronics Combo - 62oz in-stepping motors. https://www.newbiehack.com/products/electronicsandmotors-3axis-100-elcombo 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/3axiscombo_100_1-800.jpg?v=1730085209 3 Axis Electronics Combo (Medium Motors) 3 Axis Combo with 100 oz stepping motors https://www.newbiehack.com/products/router-collet-lubricant-cleaner-collet-care 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_8417-800.jpg?v=1730085212 Collet Care Lubricant - Spindle Cleaner 118 ml Collet Care Lubricant / Spindle Cleaner https://www.newbiehack.com/products/pneumatic-hydraulic-water-pump-370-gallons-per-hour-220v-110v 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/WaterPump220V_1-800.jpg?v=1730085215 Water Pump - Submersible 370 Gallons (1400L) Per Hour Submersible Water Pump https://www.newbiehack.com/products/laser-component-power-supply-high-tension-extension-wire 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/LaserPower1-800.jpg?v=1730085217 CO2 Laser Connector Wire to Power Supply Laser Power Wire Connector https://www.newbiehack.com/products/electronicsandmotors-cooling-fan-110v-ac-axial 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/CoolinFan110V_1-800.jpg?v=1730085220 Cooling Fan - 110V 110V Cooling Fan https://www.newbiehack.com/products/electronicsandmotors-cooling-fan-220v-28-24watt 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Cooling-Fan-220V_1-800.jpg?v=1730085222 Cooling Fan - 220V 220v Cooling Fan https://www.newbiehack.com/products/newbiehack-microcontroller_kits-microcontroller-beginner-kit-with-video-avr 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0301-800.jpg?v=1730085224 AVR Microcontroller Beginner Kit with DVD Microcontroller Kit with DVD https://www.newbiehack.com/products/endmill-tangential-cutting-dragknives-donektools-d2 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/d2single-edit-800.jpg?v=1730085230 Drag Knife - Tangential CNC Knife D2 Drag Knife - with mechanical pencil for scale. https://www.newbiehack.com/products/pneumatic-hydraulic-portable-air-tank 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/PortableAirTank_1-800.jpg?v=1730085232 Portable Air Tank Portable Air Tank https://www.newbiehack.com/products/laser-component-nozzle-tube-fitting-air-assist 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/NozzleTubeFittingAirAssist_1-800.jpg?v=1730085235 Laser Nozzle Tube Fitting For Air Assist Nozzle Tube Fitting for Air Assist shown with mechanical pencil for scale. https://www.newbiehack.com/products/newbiehack-prototyping-ic-socket-40-pin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0298-800.jpg?v=1730085238 IC Socket 40 Pin 20x2 40 pin IC Socket with mechanical pencil in background for scale. https://www.newbiehack.com/products/electronicsandmotors-power-supply-12v-9a 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/12v9aACADAPTER_1-800.jpg?v=1730085242 12 volt 9 or 6 amp AC Adapter 12 volt 9 amp AC Adapter https://www.newbiehack.com/products/newbiehack-power-4xaa-battery-holder-with-wire-leads 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/4AABatteryHolderWleads_2-800.jpg?v=1730085245 4 x AA Battery Holder with Wire Leads 4 AA Battery Holder with Wire Leads https://www.newbiehack.com/products/laser-components-goggles-safety-tinted 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_8596-800.jpg?v=1730085246 Tinted Laser Goggles Tinted laser googles https://www.newbiehack.com/products/newbiehack-power-9v-battery 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/9VBatteryHolderWLeads_2-800.jpg?v=1730085249 9V Battery Holder with Wire Leads 9V Battery Hold with Wire Leads https://www.newbiehack.com/products/mechanical-leadscrews-antibacklash-nut-5-5-starts-10-tpi 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/mechanical-leadscrews-_5-5-starts-10-tpi-antibacklash-nut_1584-800.jpg?v=1730085252 1/2" Anti-Backlash Nut 1/2" antibacklash nut https://www.newbiehack.com/products/electronicsandmotors-connector-female-dsub-db25-ribbon 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_8716-800.jpg?v=1730085254 DB25 Female Ribbon Connector DB25 Female Ribbon Connector https://www.newbiehack.com/products/mechanical-leadscrews-antibacklash-nut-375-2-starts-10-tpi 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/mechanical-leadscrews-_375-2-starts-10-tpi-antibacklash-nut_1586-800.jpg?v=1730085256 3/8" Anti-Backlash Nut (5 turns per inch) 3/8" anti-backlash nut (5 turns per inch, 2 starts, 10 TPI) https://www.newbiehack.com/products/electronicsandmotors-connector-male-dsub-db25-ribbon 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/DB25_20Male_20Ribbon_20Connector_201-800.jpg?v=1730085257 DB25 Male Ribbon Connector DB25 Male Ribbon Connector https://www.newbiehack.com/products/electronicsandmotors-connector-db25-conductor-ribbon-cable 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/DB25RibbonCable_1-800.jpg?v=1730085259 25 Conductor Flat Ribbon Cable 25 Conductor Ribbon Cable https://www.newbiehack.com/products/3d-printer-component-connector-male-2-54-pitch-newbiehack-connectors-male-2-54-pitch 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/2x36IDCHeader_2-800.jpg?v=1730085262 2.54mm (0.1") Pitch Male Connector 36 pin Header 2x36 pin header IDC https://www.newbiehack.com/products/electronicsandmotors-nema11-16-7ozin-newbiehack-motors-stepping_motor-16-7_ozin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-09-03_20175614-800.jpg?v=1730085266 NEMA 11 Stepper Motor (16.7 oz-in 5mm shaft) 0.67 Amps Nema 11 stepper motor https://www.newbiehack.com/products/electronicsandmotors-nema14-17ozin-newbiehack-motors-stepping_motor-17_ozin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-09-03_20172141-800.jpg?v=1730085270 NEMA 14 Stepper Motor (17 oz-in 5mm shaft) 1.0 Amps NEMA 14 stepper motor https://www.newbiehack.com/products/electronicsandmotors-nema43-1586ozin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Stepping_Motor_Nema43_1-800.jpg?v=1730085274 NEMA 42 Stepper Motor (1586 oz-in 3/4" single shaft) 5.5 Amps NEMA 43 stepping motor 1586 oz-in https://www.newbiehack.com/products/pneumatic-hydraulic-air-pump-220v 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/AirTank_1-800.jpg?v=1730085275 Air Pump 220v Air Pump 220v https://www.newbiehack.com/products/electronicsandmotors-db25-female-end-connector-pcb 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/DB25FemaleEndforPCB_1-800.jpg?v=1730085278 DB25 Pin Female End Connector for PCB DB25 Female End Connector For PCB https://www.newbiehack.com/products/newbiehack-development_tools-prototyping-microcontroller-usb-avr-programmer-usbasp 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/USBAVRProgrammer_3-800.jpg?v=1730085282 USBASP AVR Programmer USB AVR programmer https://www.newbiehack.com/products/hardware-machine-screw-25dia-3inchlength 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_8877-800.jpg?v=1730085285 1/4" x 3" Machine Screw 5 1/4 x 3 inch screws shown with a mechanical pencil for scale. https://www.newbiehack.com/products/hardware-washers-number8washer 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_8889-800.jpg?v=1730085289 #8 Washer #8 Washer 25 pack https://www.newbiehack.com/products/hardware-bolt-eyebolt-25dia-3inchlength 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Eyebolt_20_single_-800.jpg?v=1730085293 1/4" x 3" Eyebolt with 1/4" Nut Eyebolt Single https://www.newbiehack.com/products/hardware-nut-squarenut-50inches 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Square_20Nut_20_5_20Pack_20new_-800.jpg?v=1730085296 1/2" Square Nut Square Nut 5 Pack https://www.newbiehack.com/products/cnc-machine-assembled-bluechick-v4-milling 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9605-800.jpg?v=1730085300 1'x3' (12"x36") CNC Router Assembled Machine Assembled blueChick 4.2 machine https://www.newbiehack.com/products/axes-4th-100mmchuck-65mmcenterheight-0_3degperstep 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/HeadTailStock_1-800.jpg?v=1730085305 4th Axis with Tail Stock 100mm Chuck 4th Axis with Tailstock https://www.newbiehack.com/products/hardware-nut-fivesixteenths 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/5-16inchNUT_3-800.jpg?v=1730085309 5/16" Nut quantity of 5 5/16" nuts with mechanical pencil for scale https://www.newbiehack.com/products/hardware-machine-screw-3125dia-2inchlength 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/5-16inchX2inchSCREW_1-800.jpg?v=1730085311 5/16" x 2" Machine Screw 5 5/16" x 2" screws shown with mechanical pencil for scale. https://www.newbiehack.com/products/hardware-machine-screw-3125dia-2-5inchlength 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/5-16inchX2.5inchSCREW_1-800.jpg?v=1730085312 5/16" x 2 1/2" Machine Screw 5 5/16" by 2 1/2" machine screws shown with mechanical pencil for scale. https://www.newbiehack.com/products/mechanical-rails-linear-guide-rails-20mm 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/LinearGuideRail_1-800.jpg?v=1730085321 Linear Guide Rail 20mm (0.78") Linear Guide Rail with view of both sides https://www.newbiehack.com/products/mechanical-rails-linear-ball-bearing-block 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/LinearBallBearingBlock_1-800.jpg?v=1735613216 Linear Ball Bearing Block 20mm (0.78") Ball Bearing Block - Front View https://www.newbiehack.com/products/mechanical-rails-hiwin-linear-20mm-guide-rail 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/HIWINlinearRail_1-800.jpg?v=1730085329 HIWIN Spec Linear Guide Rail HIWIN linear rails https://www.newbiehack.com/products/mechanical-rails-hiwin-linear-flange-blocks 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/HIWINLinearGuideBlock_1-800.jpg?v=1730085334 HIWIN Spec Linear Guide Flange Blocks HIWIN Linear Guide Block https://www.newbiehack.com/products/endmill-twoflute-chipbreaker-finisher-onsrud-2-flute-downcut-one-half 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Onsrud-chipbreaker-halfinchcut-onefiveeightsinch-downcut-800.jpg?v=1730085336 Onsrud ChipBreaker/Finisher Two Flute Down Cut End Mill for Wood and Wood Composites Onsrud chipbreaker half inch cut end mill https://www.newbiehack.com/products/cnc-computer-system-redfly 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9204-800.jpg?v=1730085342 The redFly CNC Electronics System Redfly assembled electronics. https://www.newbiehack.com/products/endmill-twoflute-onsrud-upcut-ballnose-one-eighth 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/onsrudeighthinchbyHalfInchBallNose-800.jpg?v=1730085344 Onsrud 2 Flute 1/8" Cut Diameter Upcut Ballnose End Mills Onsrud 1/8" upcut ballnose end mill https://www.newbiehack.com/products/endmill-twoflute-onsrud-upcut-ballnose-one-quarter 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/onsrud-quarterinch-by-oneinch-upcut-ballnose-800.jpg?v=1730085345 Onsrud 2 Flute 1/4" Cut Diameter Upcut Ballnose End Mills Onsrud 1/4" two flute upcut ballnose https://www.newbiehack.com/products/newbiehack-prototyping-slide-switch-3-pin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9171-800.jpg?v=1730085347 SPDT Slide Switch 3 pin 30V 3 pin slide switch https://www.newbiehack.com/products/newbiehack-microcontroller_kits-microcontroller-beginner-kit-1-no-dvd-avr 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0308-800.jpg?v=1730085348 AVR Microcontroller Beginner Kit Microcontroller Beginner Kit https://www.newbiehack.com/products/newbiehack-microcontroller_kits-microcontroller-intermediate-kit-no-dvd-avr 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0315-800.jpg?v=1730085350 AVR Microcontroller Intermediate Kit Microcontroller Intermediate Kit https://www.newbiehack.com/products/newbiehack-microcontroller_kits-microcontroller-intermediate-kit-with-video-avr 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0317-800.jpg?v=1730085352 AVR Microcontroller Intermediate Kit with DVD Microcontroller Intermediate Kit with DVD https://www.newbiehack.com/products/newbiehack-microcontroller_kits-microcontroller-advanced-kit-no-dvd-avr 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0331-800.jpg?v=1730085353 AVR Microcontroller Advanced Kit Microcontroller Advanced Kit https://www.newbiehack.com/products/newbiehack-microcontroller_kits-microcontroller-advanced-kit-with-video-avr 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0328-800.jpg?v=1730085355 AVR Microcontroller Advanced Kit with DVD Microcontroller Advanced Kit with DVD https://www.newbiehack.com/products/newbiehack-microcontroller_kits-microcontroller-upgrade-kits-avr 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0324-800.jpg?v=1730085357 AVR Microcontroller Upgrade Kits Microcontroller Kit https://www.newbiehack.com/products/newbiehack-dvds-microcontroller_instructional-avr 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/MCTLBEG_DVD_ONLY-800.jpg?v=1730085358 Beginning Microcontrollers Tutorial DVD for AVR Microcontrollers Microcontroller Tutorial DVD https://www.newbiehack.com/products/cnc-machine-laser-spindle-combo-head 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/laserHybridInstruction-2-800.jpg?v=1730085391 Laser/Spindle Combo Head for Heavy Duty CNC Kit (greenBull) Laser Hybrid Instructional Image 1F https://www.newbiehack.com/products/newbiehack-development_tools-prototyping-testers-integrated-handheld-multimeter 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9374-800.jpg?v=1730085397 Handheld Auto Ranging Digital Multimeter Handheld auto range multimeter https://www.newbiehack.com/products/merchandise-shirts-bycnc-black-newbiehack-merchandise-shirts-bycnc-black 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/CNC-BACK-800.jpg?v=1730085401 BuildYourCNC Black T-Shirt CNC shirt back view https://www.newbiehack.com/products/merchandise-shirts-nbhack-blue-newbiehack-merchandise-shirts-nbhack-blue 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0090-800.jpg?v=1730085404 NewbieHack Blue T-Shirt / Skull Logo Newbie Hack Shirt Back https://www.newbiehack.com/products/newbiehack-input_devices-tactile-push-button-momentary-switch-6mmx6mm-through-hole-spst 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0333-800.jpg?v=1730085406 Push Button Momentary Switch (through hole) Tactile momentary push button switch 6 mm x 6 mm (through hole) https://www.newbiehack.com/products/laser-component-newbiehack-connectors-screw-terminal-binding-post 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0379-800.jpg?v=1730085412 Screw Terminal with Post Mini binding post with tin contact looking towards the screw end https://www.newbiehack.com/products/newbiehack-resistors-4-7k-ohm-quarterwatt-through-hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0495-800.jpg?v=1730085415 4.7K Ohm 1/4 Watt Through Hole Resistor 4.7K ohm resistor https://www.newbiehack.com/products/newbiehack-microcontroller-usb-avr-programmer-breadboard-adapter 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_2024-12-08_204204.png?v=1733708778 Breadboard Adapter for the USBASP AVR Programmer https://www.newbiehack.com/products/newbiehack-sensors-flex-sensor-spectra-symbol 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9426-800.jpg?v=1730085423 Flex Sensor - Senses Bending and Displacement Flex Sensor - Sensing Bending and Displacement https://www.newbiehack.com/products/newbiehack-development_tools-testers-prototyping-lcd_displays_and_leds-displays-voltage-current-amp-display-10a-100v 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9450-800.jpg?v=1730085429 Panel Mount Voltage and Current Display Voltage and Current AMP display https://www.newbiehack.com/products/newbiehack-input_devices-rotary-encoder-12mm 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9454-800.jpg?v=1730085436 Rotary Encoder 12mm Rotary Encoder https://www.newbiehack.com/products/newbiehack-resistors-10-ohm-quarterwatt-through-hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9487-800.jpg?v=1730085439 10 Ohm Through Hole Resistor 10 ohm resistor 1/4 watt https://www.newbiehack.com/products/newbiehack-resistors-22-ohm-quarterwatt-through-hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9491-800.jpg?v=1730085440 22 Ohm Through Hole Resistor 22 ohm resistor 1/4 watt https://www.newbiehack.com/products/newbiehack-resistors-47-ohm-quarterwatt-through-hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9495-800.jpg?v=1730085442 47 Ohm Through Hole Resistor 47 ohm resistor 1/4 watt https://www.newbiehack.com/products/newbiehack-resistors-100-ohm-quarterwatt-through-hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9497-800.jpg?v=1730085444 100 Ohm Through Hole Resistor 100 ohm resistor 1/4 watt https://www.newbiehack.com/products/newbiehack-resistors-150-ohm-quarterwatt-through-hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9501-800.jpg?v=1730085446 150 Ohm Through Hole Resistor 150 ohm resistor 1/4 watt https://www.newbiehack.com/products/newbiehack-resistors-220-ohm-quarterwatt-through-hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9503-800.jpg?v=1730085447 220 Ohm Through Hole Resistor 220 ohm resistor 1/4 watt https://www.newbiehack.com/products/newbiehack-resistors-270-ohm-quarterwatt-through-hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9504-800.jpg?v=1730085449 270 Ohm Through Hole Resistor 270 ohm resistor 1/4 watt https://www.newbiehack.com/products/newbiehack-resistors-330-ohm-quarterwatt-through-hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9509-800.jpg?v=1730085451 330 Ohm Through Hole Resistor 330 ohm resistor 1/4 watt https://www.newbiehack.com/products/newbiehack-resistors-470-ohm-quarterwatt-through-hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9511-800.jpg?v=1730085453 470 Ohm Through Hole Resistor 470 ohm resistor 1/4 watt https://www.newbiehack.com/products/electronicsandmotors-electronic-component-limit-switch-large-adjustable-rotary 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9514-800.jpg?v=1730085472 Adjustable Rotary Limit Switch Front/Top of Adjustable Rotary Lever Limit Switch https://www.newbiehack.com/products/control-software-mach4 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Mach4screenshot-800.jpg?v=1730085475 Mach4 CNC Control Software Screenshot of mach4 cnc control program https://www.newbiehack.com/products/newbiehack-potentiometers-trimmer-50k 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9608-800.jpg?v=1730085478 50k Through Hole Trimmer Potentiometer Top view of 50k Trimmer variable resistor potentiometer https://www.newbiehack.com/products/newbiehack-resistors-sensors-photo-sensitive-resistor-ambient-light-sensor 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9617-800.jpg?v=1730085488 Light Sensitive Resistor (Light Sensor) light sensor (photo sensitive light resistor) - front view https://www.newbiehack.com/products/newbiehack-sensors-10dof-imu-accelerometer-gyro-magnetometer-barometer 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9624-800.jpg?v=1730085493 10 Degree of Freedom Inertial Measurement Unit 10 DOF IMU (Inertial measurement unit) top view https://www.newbiehack.com/products/newbiehack-lcd_displays_and_leds-display-module-128x64-yellow-blue 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9670-800.jpg?v=1730085500 128x64 0.96" Display Module I2C Front of the 128x64 display module https://www.newbiehack.com/products/spindle-collet-25-er11-spindle-collet 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9677-800.jpg?v=1730085506 1/4" ER11 Collet for Spindles er-11 1/4" collet front view https://www.newbiehack.com/products/spindle-collet-125-er11-spindle-collet 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9684-800.jpg?v=1730085512 1/8" ER11 Collet for Spindles 1/8" er-11 collet front view https://www.newbiehack.com/products/newbiehack-sensors-temperature-humidity 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9690-800.jpg?v=1730085517 Temperature and Humidity Sensor Top view of the temperature humidity sensor https://www.newbiehack.com/products/newbiehack-development_tools-prototyping-microcontroller-usb-arm-programmer-stlinkv2-stm32-stm8 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9703-800.jpg?v=1730085521 ST Link v2 Programmer for STM32 and STM8 Microcontrollers ST Link v2 for STM32 and STM8 microcontrollers top view of all components https://www.newbiehack.com/products/newbiehack-microcontroller-arm-stmicro-stm32f0r6-withbreadboardinterface 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9724-800.jpg?v=1745716413 STM32 Microcontroller and Interface Board STM32F0 microcontroller and interface board top view https://www.newbiehack.com/products/newbiehack-microcontroller-arm-stmicro-stm32f0r6-ultra-basic-kit 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9729-800.jpg?v=1730085530 STM32 ARM Microcontroller Ultra Basic Kit The STM32 ultra basic kit showing all of the components https://www.newbiehack.com/products/newbiehack-sensors-pir-sensor-infrared-motion-detector 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9785-800.jpg?v=1730085536 PIR Sensor Pyroelectric Infrared Motion Detector PIR sensor on dark background https://www.newbiehack.com/products/endmill-four-flute-one-eighth-inch-diamater-one-eighth-inch-shank 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9792-800.jpg?v=1730085541 1/8" 4 Flute End Mill 1/8" shank 17mm cut length 1/8" four flute end mill https://www.newbiehack.com/products/pneumatic-hydraulic-check-valve-onequarterinch-id 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9811-800.jpg?v=1730085546 Check Valve (One-Way Valve) for 1/4" ID tube Check Valve 1/4" ID https://www.newbiehack.com/products/newbiehack-input_devices-lcd_displays_and_leds-led-button-tactile-switch 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9802-800.jpg?v=1730085554 LED Button Tactile Switch LED button tactile switch https://www.newbiehack.com/products/newbiehack-resistors-sensors-temperature-probe 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9827-800.jpg?v=1730085560 Platinum Resistance Temperature Sensor Probe Temperature Sensor Probe view from top https://www.newbiehack.com/products/newbiehack-sensors-magnetometer-triple-axis-compass-i2c 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9833-800.jpg?v=1730085567 Magnetometer Triple Axis Compass i2c Triple Axis Magnetometer product view https://www.newbiehack.com/products/spindle-collet-6mm-er11-spindle-collet 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9843-800.jpg?v=1730085572 6mm ER11 Collet for Spindles 6mm ER11 Collet https://www.newbiehack.com/products/spindle-collet-4mm-er11-spindle-collet 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9850-800.jpg?v=1730085577 4mm ER11 Collet for Spindles ER11 4mm collet https://www.newbiehack.com/products/endmill-twoflute-onsrud-straight-v-for-wood 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9853-800.jpg?v=1730085586 Onsrud 2 Flute 1/4" Cut Diameter Straight V for Woods and Wood Composites 1/4" Straight V Flute End Mill profile view https://www.newbiehack.com/products/endmill-twoflute-onsrud-v-carving-1-inch-60-degree 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9874-800.jpg?v=1730085592 1" Carbide Tipped Two Flute Straight 60° V Flute for V-Grooving or Beveling Edges for Wood Onsrud V-Carving end mill 1 inch cut diamater https://www.newbiehack.com/products/endmill-twoflute-onsrud-v-carving-one-and-one-half-inch-90-degree 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9870-800.jpg?v=1730085597 1 1/2" Carbide Tipped Two Flute Straight 90° V Flute for V-Grooving or Beveling Edges for Wood Onsrud V-Carving 1-1/2" End Mill https://www.newbiehack.com/products/endmill-twoflute-onsrud-v-carving-2-inch-120-degree 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9878-800.jpg?v=1730085602 2" Carbide Tipped Two Flute Straight 120° V Flute for V-Grooving or Beveling Edges for Wood Onsrud 2" Cut Diameter V-Carving End Mill https://www.newbiehack.com/products/endmill-twoflute-onsrud-v-carving-2-inch-140-degree 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9883-800.jpg?v=1730085608 2" Carbide Tipped Two Flute Straight 140° V Flute for V-Grooving or Beveling Edges for Wood Onsrud 2" 140 degree Cut Diameter V-Carving End Mill https://www.newbiehack.com/products/cnc-machine-vertical-laser-xl-laser-cutter 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/vertical_20laser_20rendered_201-800.jpg?v=1730085779 4' x 8' Vertical Laser XL - Laser Cutter/Engraver Rendered image of the vertical laser xl 4'x8' laser cutter from buildyourcnc https://www.newbiehack.com/products/endmill-singleflute-downcut-onequarter-oneandonequarter 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9950-800.jpg?v=1730085792 1/4" by 1-1/4" Solid Carbide Single Flute End Mill <b>Downcut</b> Super O Flute for Plastic, Wood, Aluminum, Solid Surface 1/4" x 1-1/4" Solid Carbide One Flute Downcut Super O Flute for Plastic, Wood, Aluminum https://www.newbiehack.com/products/cnc-machine-greenbull-v4-6x-milling 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/overall-300-800_0d81f9b4-109d-4077-829c-f1f0fbf42995.jpg?v=1730085799 6'x12' Heavy Duty CNC Machine (greenBull 6X) greenbull in our shop https://www.newbiehack.com/products/cnc-machine-greenbull-v4-4x-milling 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/overall-300-800_e6f4a954-5563-4a49-b809-ed9cb8556c8f.jpg?v=1730085806 4'x8' Heavy Duty CNC Machine greenBull in our shop https://www.newbiehack.com/products/newbiehack-services-stencils 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9963-800.jpg?v=1730085817 Custom Stencil Service Custom stencil for PCB (Printed Circuit Board) https://www.newbiehack.com/products/laser-component-laser-control-system 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0142-800.jpg?v=1730085848 Laser Control System https://www.newbiehack.com/products/newbiehack-communication-bluetooth-module-2_0-2_4ghz 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_5693_1.jpg?v=1730692842 Bluetooth Module for Wireless Communications https://www.newbiehack.com/products/spindle-collet-three-eights-er20-spindle-collet 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_5703-800.jpg?v=1730085855 3/8" ER20 Collet for Spindles This is a 3/8 inch ER20 collet shown with a mechanical pencil for scale. https://www.newbiehack.com/products/mechanical-steel-rod-quarter-inch 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_5898-800.jpg?v=1730085858 1/4" Drill Rod (Per Inch) 1/4" Steel Drill Rod https://www.newbiehack.com/products/laser-component-power-supply-co2-80w 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_5843-800.jpg?v=1730085861 80 Watt Laser Tube Power Supply 80W Laser Power Supply https://www.newbiehack.com/products/laser-component-industrial-water-chiller 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_5828-800.jpg?v=1730085863 Industrial Water Chiller for 60-80W CO2 Laser Industrial Water Chiller for 60-80 watt laser https://www.newbiehack.com/products/mechanical-steel-rod-half-inch 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_5847-800.jpg?v=1730085866 1/2" Steel Rod 1/2 inch steel rod https://www.newbiehack.com/products/hardware-machine-screw-375dia-2inchlength 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_5861-800.jpg?v=1730085870 3/8" x 2" Machine Screw 3/8" x 2" screw shown with mechanical pencil for scale https://www.newbiehack.com/products/hardware-machine-screw-375dia-3inchlength 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_5858-800.jpg?v=1730085873 3/8" x 3" Machine Screw 3/8 inch x 3 inch machine screw shown with mechanical pencil for scale https://www.newbiehack.com/products/hardware-nut-threeeighths 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_5864-800.jpg?v=1730085876 3/8" Nut 3/8 inch machine nut shown with mechanical pencil for scale https://www.newbiehack.com/products/hardware-nut-insert-number-eight 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_5911-800.jpg?v=1730085879 #8 Insert Nut Number 8 insert nut shown with mechanical pencil for scale https://www.newbiehack.com/products/hardware-nut-insert-onequarter-inch 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_5912-800.jpg?v=1730085882 1/4" Insert Nut one quarter inch Insert Nut shown with mechanical pencil for scale https://www.newbiehack.com/products/laser-component-laser-tube-co2-80watt 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_5927-800.jpg?v=1730085886 80 Watt CO2 Laser Tube 80 watt CO2 laser Tube https://www.newbiehack.com/products/newbiehack-development_tools-prototyping-testers-probe-lead-cable 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Multimeter_20Banana_20Plug-800.jpg?v=1730085888 Probe Lead Cable 500v - Banana Security Plug Multimeter Security Banana Plug To Test Hook Clip Probe Lead Cable 500V https://www.newbiehack.com/products/endmill-singleflute-upcut-0625-1-flute 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9914-800.jpg?v=1730085892 1/16" Cut Diameter Single Flute End Mills for Plastic and Wood Cutting Single flute 1/16" cut diameter 65-000 Onsrud End Mill https://www.newbiehack.com/products/hardware-machine-screw-25dia-4inchlength 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9937-800.jpg?v=1730085896 1/4" x 4" Machine Screw 1/4" x 4" machine screw https://www.newbiehack.com/products/spindle-inverter-2-2kw-spindle-80mm-mount 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9941-800.jpg?v=1730085898 80mm aluminum alloy mount for 2.2kW Spindle 80mm mount for Spindle https://www.newbiehack.com/products/newbiehack-microcontroller-arm-stmicro-stm32f0r6-beginners-kit 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_9991-800.jpg?v=1730085917 ARM Microcontroller Beginners Kit (STM32F0) https://www.newbiehack.com/products/newbiehack-microcontroller-arm-stmicro-stm32f0r6-intermediate-kit 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0006-800.jpg?v=1730085941 ARM Microcontroller Intermediate Kit (STM32F0) https://www.newbiehack.com/products/newbiehack-microcontroller-arm-stmicro-stm32f0r6-advanced-kit-withoutbook 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0030-800.jpg?v=1730085978 ARM Microcontroller Advanced Kit (STM32F0) https://www.newbiehack.com/products/mechanical-drive-pulley-2-pitch-15-teeth-xl 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0137-800.jpg?v=1730085986 XL 15 Teeth .2" Pitch Drive Pulley 1/2" Bore XL 15 teeth drive pulley shown with mechanical pencil for scale https://www.newbiehack.com/products/electronicsandmotors-electronic-component-breakout-mach3-usb-board 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20181228_145312__01-800_69a85449-67c2-4cd2-be47-f5f9fd5acebc.jpg?v=1730086041 Mach3 USB Interface Board Mach3 USB Interface Board Controller https://www.newbiehack.com/products/cnc-machine-fabricator-pro-milling-machine 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0704-800.jpg?v=1730086084 The Fabricator Pro Series - METAL 4x8, 5x10, 6x12 CNC Router Fabricator Pro CNC Router 5'x10' cutting plywood https://www.newbiehack.com/products/endmill-twoflute-onsrud-upcut-one-quarter-foam-cutting-52-564 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0719-800.jpg?v=1730086090 Onsrud 2 Flute 1/4" Cut Diameter Upcut Foam Cutting End Mill foam cutting end mill by onsrud 2-1/4" cut length 1/4" cut diameter https://www.newbiehack.com/products/electronicsandmotors-breakout-relays-relay-board-250v-12a-5v 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_6496-800.jpg?v=1730086097 Relay Board to Switch on Electrical Devices Front view of 5V 250V 12A relay board https://www.newbiehack.com/products/spindle-inverter-female-round-connector-threaded-20mm 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/A6302214-800.jpg?v=1730086110 Round Female 4 pin 20mm spindle connector Threaded spindle connector variant 2 https://www.newbiehack.com/products/cnc-machine-greenbull-v4-4x-hybrid 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/new_20website_20pics-800.jpg?v=1730086113 4'x8' Heavy Duty CNC Machine with Laser this is a picture of the greenBull CNC machine with a Laser/Spindle on the head. https://www.newbiehack.com/products/cnc-machine-greenbull-v4-5x-hybrid 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/spindlaser_20pic-800.jpg?v=1730086114 5'X10' Heavy Duty CNC Machine with Laser Laser spindle combo https://www.newbiehack.com/products/cnc-machine-greenbull-v4-6x-hybrid 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/spindlaser_20pic-800_0643c80e-8c8c-495e-8d8e-c10d1e415d1d.jpg?v=1730086116 6'x12' Heavy Duty CNC Spindle/Laser Machine (greenBull 6X) laser head https://www.newbiehack.com/products/electronicsandmotors-electronic-component-breakout-mach4-mach3-usb-ethernet-board 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/pokeyscnc-800.jpg?v=1730086118 USB and Ethernet CNC Control for Mach3 or Mach4 (Pokeys57CNC) https://www.newbiehack.com/products/electronicsandmotors-electronic-component-breakout-cablepack 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/cable_set-800.jpg?v=1730086119 PoKeys57CNC CablePack Cable Pack for pokeys57cnc https://www.newbiehack.com/products/endmill-onsrud-63-610 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41M73vLaIiL.jpg?v=1730086126 LMT Onsrud 63-610 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 63-610 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-602 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41M73vLaIiL_752f6a6a-c173-447a-9155-cf2d3e0a1f77.jpg?v=1730086132 LMT Onsrud 63-602 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 1.5000" Overall Length, 0.0625" Cutting Diameter, 0.1250" Shank Diameter primary image of LMT Onsrud 63-602 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 1.5000" Overall Length, 0.0625" Cutting Diameter, 0.1250" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-65-010 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Yqx3m2iIL.jpg?v=1730086138 LMT Onsrud 65-010 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 65-010 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-776 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31edGoswPsL.jpg?v=1730086145 LMT Onsrud 63-776 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 63-776 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-62-727 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Y8k0BTudL.jpg?v=1730086151 LMT Onsrud 62-727 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 62-727 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-700 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31wzGE0BfQL.jpg?v=1730086158 LMT Onsrud 52-700 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 52-700 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-251 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41TH253hGAL.jpg?v=1730086164 LMT Onsrud 60-251 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diame primary image of LMT Onsrud 60-251 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-618 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41M73vLaIiL_077b5d55-9515-498e-939d-f2cc6543b2d2.jpg?v=1730086170 LMT Onsrud 63-618 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 63-618 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-241 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41TH253hGAL_56d35c9e-7203-45fa-a36d-84d80aaae0de.jpg?v=1730086172 LMT Onsrud 60-241 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diame primary image of LMT Onsrud 60-241 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-253 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41TH253hGAL_64831d5c-292e-49f9-bfd0-65c34046748e.jpg?v=1730086177 LMT Onsrud 60-253 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diame primary image of LMT Onsrud 60-253 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-269 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41TH253hGAL_4e59b2b9-301f-4cce-919e-aa96f4e8b69a.jpg?v=1730086627 LMT Onsrud 60-269 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diame primary image of LMT Onsrud 60-269 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-67-211 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41g89suaOQL.jpg?v=1730086188 LMT Onsrud 67-211 Solid Carbide Upcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter primary image of LMT Onsrud 67-211 Solid Carbide Upcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-620 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41M73vLaIiL_ec1fd57f-058a-4776-b027-52627824c497.jpg?v=1730086195 LMT Onsrud 63-620 Solid Carbide Upocut Spiral O Flute Cutting TOOL, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 63-620 Solid Carbide Upocut Spiral O Flute Cutting TOOL, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-606 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41M73vLaIiL_cb3275e3-3da3-4324-989c-d7c90d531571.jpg?v=1730086549 LMT Onsrud 63-606 Solid Carbide Upocut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 63-606 Solid Carbide Upocut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-124mw 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41UeVp0xbOL.jpg?v=1730086208 LMT Onsrud 60-124MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank primary image of LMT Onsrud 60-124MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-245 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41TH253hGAL_021f3abd-26fd-4701-94a8-269117e0da98.jpg?v=1730086215 LMT Onsrud 60-245 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diame primary image of LMT Onsrud 60-245 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-57-360 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41hBNJNR3gL.jpg?v=1730086222 LMT Onsrud 57-360 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter primary image of LMT Onsrud 57-360 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-57-285 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41hBNJNR3gL_e4418c55-fd82-4ecb-8805-ad976160e743.jpg?v=1730086227 LMT Onsrud 57-285 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 57-285 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-57-240 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41hBNJNR3gL_940fea5e-c682-4a2d-9151-49baf0b2d46a.jpg?v=1730086234 LMT Onsrud 57-240 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 57-240 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-57-395 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41hBNJNR3gL_7ac2cc28-5dba-425f-861b-8ce8c5a3e7c7.jpg?v=1730086240 LMT Onsrud 57-395 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diameter primary image of LMT Onsrud 57-395 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-57-320 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41hBNJNR3gL_2b33d244-93bb-4b45-a3b5-566ffb29034b.jpg?v=1730086246 LMT Onsrud 57-320 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter primary image of LMT Onsrud 57-320 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-57-260 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41hBNJNR3gL_30b5b926-f6b0-4783-b12d-3f4a7dea2cfc.jpg?v=1730086252 LMT Onsrud 57-260 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 57-260 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-701 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31xU4NviqZL.jpg?v=1730086257 LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.0625" Cutting Diameter, 0.1250" Shank Diameter primary image of LMT Onsrud 63-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.0625" Cutting Diameter, 0.1250" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-775 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31edGoswPsL_79f79a17-1c88-439b-977d-2bb650362179.jpg?v=1730086263 LMT Onsrud 63-775 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 63-775 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-710 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31xU4NviqZL_f3e95d4b-6282-4aff-8f8b-128cffb02698.jpg?v=1730086268 LMT Onsrud 63-710 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 63-710 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-715 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31xU4NviqZL_2108c949-8239-4fa1-974d-ca6731f9b0bd.jpg?v=1730086273 LMT Onsrud 63-715 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1563" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 63-715 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1563" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-718 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31xU4NviqZL_1b7736d2-074a-4d4b-adfe-a1ac02fd587e.jpg?v=1730086280 LMT Onsrud 63-718 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 63-718 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-724 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31xU4NviqZL_2e84438f-08cd-4ce8-a4d8-17409107cdba.jpg?v=1730086284 LMT Onsrud 63-724 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter primary image of LMT Onsrud 63-724 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-725 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31xU4NviqZL_274cad02-c6e3-4cfb-bad4-0e39df693fb1.jpg?v=1730086289 LMT Onsrud 63-725 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 63-725 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-726 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31xU4NviqZL_5e401970-c463-45cf-8411-e234fc3c68c4.jpg?v=1730086294 LMT Onsrud 63-726 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 63-726 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-733 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31xU4NviqZL_d82a2a55-0303-49e9-89af-73b777cf50e2.jpg?v=1730086299 LMT Onsrud 63-733 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter primary image of LMT Onsrud 63-733 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-760 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31edGoswPsL_93f03512-3b0f-42fc-bb36-977f953ba883.jpg?v=1730086305 LMT Onsrud 63-760 Solid Carbide Upcut Spiral O Flute, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.1250" Shank Diameter primary image of LMT Onsrud 63-760 Solid Carbide Upcut Spiral O Flute, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.1250" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-751 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31edGoswPsL_77ad2a07-8452-4917-a87b-7cec8f35cf4e.jpg?v=1730086311 LMT Onsrud 63-751 Solid Carbide Upcut Spiral O Flute, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.0625" Cutting Diameter, 0.1250" Shank Diameter primary image of LMT Onsrud 63-751 Solid Carbide Upcut Spiral O Flute, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.0625" Cutting Diameter, 0.1250" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-783 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31edGoswPsL_aed2cccd-eb78-4e19-9f96-9c94cb7c5df6.jpg?v=1730086317 LMT Onsrud 63-783 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter primary image of LMT Onsrud 63-783 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-768 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31edGoswPsL_67e8be09-19db-4c4e-ba58-ceaa8766b4f8.jpg?v=1730086323 LMT Onsrud 63-768 Solid Carbide Upcut Spiral O Flute, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 63-768 Solid Carbide Upcut Spiral O Flute, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-365 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41U_2BqBqCwNL.jpg?v=1730086332 LMT Onsrud 52-365 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter primary image of LMT Onsrud 52-365 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-704 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31wzGE0BfQL_3599ae2f-5298-4593-8c83-de7cef2e71ac.jpg?v=1730086342 LMT Onsrud 52-704 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.2500" Cutting Diameter, 0.5000" Shank Diameter primary image of LMT Onsrud 52-704 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.2500" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-724 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31wzGE0BfQL_e1fbf805-12b7-4e35-827a-f41f1f9ff198.jpg?v=1730086348 LMT Onsrud 52-724 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 5.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diameter primary image of LMT Onsrud 52-724 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 5.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-703 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31wzGE0BfQL_4de4947c-b061-4418-b87b-112432a4d9b6.jpg?v=1730086354 LMT Onsrud 52-703 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 52-703 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-701 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31wzGE0BfQL_9d121fc6-a5d5-4006-8ae5-8f3de36ef398.jpg?v=1730086360 LMT Onsrud 52-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter primary image of LMT Onsrud 52-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-708 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/311cQLy1eFL.jpg?v=1730086366 LMT Onsrud 52-708 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 2.5000" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter primary image of LMT Onsrud 52-708 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 2.5000" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-285 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41c77zTWP4L.jpg?v=1730086372 LMT Onsrud 52-285 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 52-285 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-367 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41c77zTWP4L_bd637839-ddf6-49fd-8b24-a71f923c7875.jpg?v=1730086378 LMT Onsrud 52-367 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter primary image of LMT Onsrud 52-367 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-240 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41c77zTWP4L_71c1260f-b945-4627-a892-ec8e0b439303.jpg?v=1730086385 LMT Onsrud 52-240 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 52-240 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-325 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41c77zTWP4L_588a874c-3647-43d2-ba04-c84594f0eb26.jpg?v=1730086391 LMT Onsrud 52-325 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter primary image of LMT Onsrud 52-325 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-260 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41c77zTWP4L_e48be3fa-9296-4faa-8811-0b1b89f7939c.jpg?v=1730086400 LMT Onsrud 52-260 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 52-260 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-385 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41c77zTWP4L_7c6e3004-0af0-4d11-bb6d-3a3bd9dd1e36.jpg?v=1730086406 LMT Onsrud 52-385 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.6250" Cutting Diameter, 0.6250" Shank Diameter primary image of LMT Onsrud 52-385 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.6250" Cutting Diameter, 0.6250" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-300 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41c77zTWP4L_488f9341-9f84-4124-a282-03fce1cdacee.jpg?v=1730086412 LMT Onsrud 52-300 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.3125" Cutting Diameter, 0.3125" Shank Diameter primary image of LMT Onsrud 52-300 Solid Carbide Upcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.3125" Cutting Diameter, 0.3125" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-64-033 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/415RlK-WsnL.jpg?v=1730086419 LMT Onsrud 64-033 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter primary image of LMT Onsrud 64-033 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/electronicsandmotors-electronic-component-driver-postep60-256 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/postep60-800.jpg?v=1730086421 PoStep60-256 Stepper Driver PoStep60-256 Stepper driver https://www.newbiehack.com/products/endmill-onsrud-64-012 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/415RlK-WsnL_70b15a2f-d680-40ba-be72-b75ff33cd205.jpg?v=1730086427 LMT Onsrud 64-012 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 64-012 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-64-000 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/415RlK-WsnL_cec660b7-1645-473f-8007-39919eee2390.jpg?v=1730086432 LMT Onsrud 64-000 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.0625" Cutting Diameter, 0.1250" Shank Diameter primary image of LMT Onsrud 64-000 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.0625" Cutting Diameter, 0.1250" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-64-018 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/415RlK-WsnL_d02d52ef-5753-478c-a13e-b9a1cf5e31a1.jpg?v=1730086438 LMT Onsrud 64-018 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 64-018 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-62-725 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Y8k0BTudL_34430d7f-2306-49f2-a5b8-806b9576f546.jpg?v=1730086444 LMT Onsrud 62-725 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 62-725 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-62-712 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Y8k0BTudL_0549be79-838a-4311-9760-26fe0cbae67d.jpg?v=1730086450 LMT Onsrud 62-712 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 62-712 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-62-733 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Y8k0BTudL_b4c13a77-8a3f-4864-a4f3-29bc4dbf9d70.jpg?v=1730086457 LMT Onsrud 62-733 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter primary image of LMT Onsrud 62-733 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-62-719 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Y8k0BTudL_7186daab-9b90-43df-a93e-06b80ae60b1b.jpg?v=1730086462 LMT Onsrud 62-719 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter primary image of LMT Onsrud 62-719 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-37-21 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31qDsWqwKKL.jpg?v=1730086468 LMT Onsrud 37-21 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.005" Tip Diameter, 30 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) primary image of LMT Onsrud 37-21 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.005" Tip Diameter, 30 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-37-23 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31_2BTpJ3UXrL.jpg?v=1730086474 LMT Onsrud 37-23 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.010" Tip Diameter, 30 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) primary image of LMT Onsrud 37-23 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.010" Tip Diameter, 30 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-37-25 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31_2BTpJ3UXrL_36cb1be2-8895-4a33-aa15-147b7c001346.jpg?v=1730086480 LMT Onsrud 37-25 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.020" Tip Diameter, 30 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) primary image of LMT Onsrud 37-25 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.020" Tip Diameter, 30 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-37-27 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31_2BTpJ3UXrL_812bf2ce-dd1c-4b87-ad59-ddc9c5336c71.jpg?v=1730086486 LMT Onsrud 37-27 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.030" Tip Diameter, 30 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) primary image of LMT Onsrud 37-27 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.030" Tip Diameter, 30 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-37-29 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31_2BTpJ3UXrL_4c1d85c0-a671-4bee-a3d4-d3695b088d68.jpg?v=1730086492 LMT Onsrud 37-29 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.040" Tip Diameter, 30 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) primary image of LMT Onsrud 37-29 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.040" Tip Diameter, 30 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) https://www.newbiehack.com/products/electronicsandmotors-electronic-component-driver-postep25-32 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/postep25-800.jpg?v=1730086495 PoStep25-32 Stepper Driver PoStep25-32 0.5 to 2.5 Amps Phase Current https://www.newbiehack.com/products/electronicsandmotors-electronic-component-popower24-100 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/popower100-24-MW-800.jpg?v=1730086496 PoPower24-100 Power Supply PoPower24-100 https://www.newbiehack.com/products/endmill-onsrud-62-713 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Y8k0BTudL_95a19dfd-4c11-42ad-8ecf-6cca669aeda4.jpg?v=1730086502 LMT Onsrud 62-713 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.1250" Shank Diameter primary image of LMT Onsrud 62-713 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.1250" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-57-287 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41hBNJNR3gL_4c23897d-7055-4851-b47c-a311e46209c4.jpg?v=1730086510 LMT Onsrud 57-287 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 57-287 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-57-365 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41hBNJNR3gL_8f78fe1e-08a4-48c1-ba25-3c08eb2a31b3.jpg?v=1730086518 LMT Onsrud 57-365 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter primary image of LMT Onsrud 57-365 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-65-023 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Yqx3m2iIL_7ffc7fd9-a33e-4466-91ad-0c940438c597.jpg?v=1730086525 LMT Onsrud 65-023 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 65-023 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-65-020 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Yqx3m2iIL_51bccce8-848b-404b-8afe-cdfa33b5f249.jpg?v=1730086531 LMT Onsrud 65-020 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 65-020 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-65-000 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Yqx3m2iIL_9196ac84-2f61-4816-8826-f42f78a5dd71.jpg?v=1730086537 LMT Onsrud 65-000 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.0625" Cutting Diameter, 0.1250" Shank Diameter primary image of LMT Onsrud 65-000 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.0625" Cutting Diameter, 0.1250" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-62-762 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31B18-GH11L.jpg?v=1730086543 LMT Onsrud 62-762 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 62-762 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-62-718 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Y8k0BTudL_beb977cf-ad04-44d3-accb-230810ca7a68.jpg?v=1730086554 LMT Onsrud 62-718 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 62-718 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-65-027 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Yqx3m2iIL_05d02210-3da6-406f-9504-ae9372c88350.jpg?v=1730086559 LMT Onsrud 65-027 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 65-027 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-62-775 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31B18-GH11L_65386ce7-e05a-475d-a679-9ac9fdb6018d.jpg?v=1730086564 LMT Onsrud 62-775 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 62-775 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-62-763 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31B18-GH11L_3fcf5a7b-8fe3-406c-a329-2bd43b1bd9e9.jpg?v=1730086569 LMT Onsrud 62-763 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.1250" Shank Diameter primary image of LMT Onsrud 62-763 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.1250" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-62-783 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31B18-GH11L_6ccaec92-39c1-4be3-b5eb-9d6ef8b5d677.jpg?v=1730086574 LMT Onsrud 62-783 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter primary image of LMT Onsrud 62-783 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-62-768 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31B18-GH11L_fb812300-cff3-45be-b855-97978583c782.jpg?v=1730086579 LMT Onsrud 62-768 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 62-768 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-169mw 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41UeVp0xbOL_bd0ec67f-18d3-46d0-b0f5-61a209167306.jpg?v=1730086584 LMT Onsrud 60-169MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank primary image of LMT Onsrud 60-169MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-194mw 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41UeVp0xbOL_846008d1-dca3-400e-995c-5202d5d9b794.jpg?v=1730086589 LMT Onsrud 60-194MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 5.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank primary image of LMT Onsrud 60-194MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 5.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-123mw 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41UeVp0xbOL_61140498-c991-4b1f-83f3-55afb1fc0a0a.jpg?v=1730086594 LMT Onsrud 60-123MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank primary image of LMT Onsrud 60-123MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-65-013 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Yqx3m2iIL_99aaa679-f8c7-41c1-baf8-25affa2b8c5e.jpg?v=1730086599 LMT Onsrud 65-013 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.1250" Shank Diameter primary image of LMT Onsrud 65-013 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.1250" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-625 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41M73vLaIiL_1a59ce62-3c09-4f2f-bee2-3f8a19335972.jpg?v=1730086604 LMT Onsrud 63-625 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter primary image of LMT Onsrud 63-625 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-37-01 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41Yp18Ax96L.jpg?v=1730086609 LMT Onsrud 37-01 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.005" Tip Diameter, 60 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) primary image of LMT Onsrud 37-01 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.005" Tip Diameter, 60 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-37-03 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41Yp18Ax96L_377b3dd1-61ed-42af-aa47-70ec946e386d.jpg?v=1730086614 LMT Onsrud 37-03 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.010" Tip Diameter, 60 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) primary image of LMT Onsrud 37-03 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.010" Tip Diameter, 60 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-37-05 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41Yp18Ax96L_8f3d1935-8ab2-4578-ae45-ee2522fea736.jpg?v=1730086619 LMT Onsrud 37-05 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.020" Tip Diameter, 60 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) primary image of LMT Onsrud 37-05 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.020" Tip Diameter, 60 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-37-09 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41Yp18Ax96L_abb90f6a-5b02-420a-92b6-e5d97a08ac17.jpg?v=1730086624 LMT Onsrud 37-09 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.040" Tip Diameter, 60 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) primary image of LMT Onsrud 37-09 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.040" Tip Diameter, 60 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-60-120mw 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41UeVp0xbOL_a7935901-4b89-471c-b64b-eff9e225fbb8.jpg?v=1730086632 LMT Onsrud 60-120MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank D primary image of LMT Onsrud 60-120MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-37-31 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31gs2-5NVOL.jpg?v=1730086637 LMT Onsrud 37-31 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.060" Tip Diameter, 30 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) primary image of LMT Onsrud 37-31 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.060" Tip Diameter, 30 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-37-35 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31gs2-5NVOL_73bda911-fd87-4765-b507-3bc375702d7f.jpg?v=1730086643 LMT Onsrud 37-35 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, .090" Tip Diameter, 30 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) primary image of LMT Onsrud 37-35 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, .090" Tip Diameter, 30 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-60-254 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41QHW8jWMqL.jpg?v=1730086646 LMT Onsrud 60-254 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Dia primary image of LMT Onsrud 60-254 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-65-033 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Yqx3m2iIL_80a7e09e-9c2c-4cff-bb49-27f94c75bb9d.jpg?v=1730086651 LMT Onsrud 65-033 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter primary image of LMT Onsrud 65-033 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-64-025 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/415RlK-WsnL_b82f9e40-90f0-4a5a-91c3-475b3d5b94b0.jpg?v=1730086657 LMT Onsrud 64-025 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 25 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 64-025 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 25 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-66-910altin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41iyIvSM7OL.jpg?v=1730086662 LMT Onsrud 66-910ALTIN High Performance Composite Router with Burr Point, AlTiN Finish, 1" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3" Overall Length (Pack of 1) primary image of LMT Onsrud 66-910ALTIN High Performance Composite Router with Burr Point, AlTiN Finish, 1" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-63-774 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31edGoswPsL_748b1e33-67e8-4afd-a4b3-c00980c92d73.jpg?v=1730086668 LMT Onsrud 63-774 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 63-774 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-65-021 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Yqx3m2iIL_03bee03b-3229-4f53-89dc-b17468ea136d.jpg?v=1730086673 LMT Onsrud 65-021 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 65-021 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-171mw 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41UeVp0xbOL_3003b386-54ad-4c29-a400-9bdc374c7f23.jpg?v=1730086679 LMT Onsrud 60-171MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank primary image of LMT Onsrud 60-171MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endill-onsrud-64-016 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/415RlK-WsnL_f3cf14bd-0001-4aaf-951f-d1f5cbe24b2d.jpg?v=1730086684 LMT Onsrud 64-016 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter primary image of LMT Onsrud 64-016 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-57-280 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41hBNJNR3gL_9b771b2b-a8f0-4c3d-8aa8-e5e79cced81d.jpg?v=1730086690 LMT Onsrud 57-280 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 57-280 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-63-624 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41M73vLaIiL_e51689de-9903-4ac8-884d-540fbe72f2aa.jpg?v=1730086695 LMT Onsrud 63-624 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 63-624 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-57-325 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41hBNJNR3gL_962b0fe8-d7d6-42d3-873b-578826390cb5.jpg?v=1730086700 LMT Onsrud 57-325 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter primary image of LMT Onsrud 57-325 Solid Carbide Downcut Spiral Wood Rout, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-66-914altin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41BlhwFJs_2BL.jpg?v=1730086706 LMT Onsrud 66-914ALTIN High Performance Composite Router with Burr Point, AlTiN Finish, 1-1/2" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3-1/2" Overall Length (Pack of 1) primary image of LMT Onsrud 66-914ALTIN High Performance Composite Router with Burr Point, AlTiN Finish, 1-1/2" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3-1/2" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-66-913altin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41dmniQxaaL.jpg?v=1730086711 LMT Onsrud 66-913ALTIN High Performance Composite Router with No Point, AlTiN Finish, 1-1/2" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3-1/2" Overall Length (Pack of 1) primary image of LMT Onsrud 66-913ALTIN High Performance Composite Router with No Point, AlTiN Finish, 1-1/2" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3-1/2" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-60-196mw 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41UeVp0xbOL_438cc251-87c4-4dbc-b7fe-505363c2d03a.jpg?v=1730086716 LMT Onsrud 60-196MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank primary image of LMT Onsrud 60-196MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-66-916altin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41uxerN1o_2BL.jpg?v=1730086722 LMT Onsrud 66-916ALTIN High Performance Composite Router with Drill Point, AlTiN Finish, 1-1/2" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3-1/2" Overall Length (Pack of 1) primary image of LMT Onsrud 66-916ALTIN High Performance Composite Router with Drill Point, AlTiN Finish, 1-1/2" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3-1/2" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-60-242 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41QHW8jWMqL_53aeef00-a1da-4af9-ab62-e5afb5475246.jpg?v=1730086727 LMT Onsrud 60-242 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Dia primary image of LMT Onsrud 60-242 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-181mw 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41UeVp0xbOL_3e75eca9-135b-4cd1-9bbd-8c7287146946.jpg?v=1730086732 LMT Onsrud 60-181MW Solid Cabide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 5.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank D primary image of LMT Onsrud 60-181MW Solid Cabide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 5.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-702 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31wzGE0BfQL_a2c68989-84ca-4e59-9d6a-698db37592c6.jpg?v=1730086739 LMT Onsrud 52-702 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter primary image of LMT Onsrud 52-702 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-62-726 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Y8k0BTudL_3aad4971-99d8-4b87-8b54-e0742f21cc1f.jpg?v=1730086746 LMT Onsrud 62-726 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 62-726 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-65-018 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Yqx3m2iIL_d93ddbbf-709e-4328-aaa4-f8a60c9a8412.jpg?v=1730086752 LMT Onsrud 65-018 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 65-018 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-65-019 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31Yqx3m2iIL_a3fd52cc-26e9-491e-b568-6d965b0504d3.jpg?v=1730086758 LMT Onsrud 65-019 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter primary image of LMT Onsrud 65-019 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-707 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31wzGE0BfQL_ace71163-c3b9-43b6-b08b-e101e4202c6f.jpg?v=1730086764 LMT Onsrud 52-707 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 52-707 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-249 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41TH253hGAL_2261b052-b29f-4b64-92c6-de9338de7e34.jpg?v=1730086771 LMT Onsrud 60-249 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diame primary image of LMT Onsrud 60-249 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-173mw 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/317H5r_2Bt40L.jpg?v=1730086778 LMT Onsrud 60-173MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank primary image of LMT Onsrud 60-173MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-67-206 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41HXeXMGqcL.jpg?v=1730086785 LMT Onsrud 67-206 Solid Carbide Downcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter primary image of LMT Onsrud 67-206 Solid Carbide Downcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-277 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41TH253hGAL_acd9f7f4-5b46-44fb-8e6a-299c82d7c79b.jpg?v=1730086788 LMT Onsrud 60-277 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 6.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diame primary image of LMT Onsrud 60-277 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 6.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-163mw 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41UeVp0xbOL_00d657e5-b761-44f8-aa37-0112d4d5a5ea.jpg?v=1730086794 LMT Onsrud 60-163MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank primary image of LMT Onsrud 60-163MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-278 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41QHW8jWMqL_00b434d6-3711-4939-8e23-6ce4eb433d00.jpg?v=1730086797 LMT Onsrud 60-278 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 6.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Dia primary image of LMT Onsrud 60-278 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 6.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-66-911altin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/419nOQTXn6L.jpg?v=1730086803 LMT Onsrud 66-911ALTIN High Performance Composite Router with Endmill Point, AlTiN Finish,, 1" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3" Overall Length (Pack of 1) primary image of LMT Onsrud 66-911ALTIN High Performance Composite Router with Endmill Point, AlTiN Finish,, 1" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-67-215 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41g89suaOQL_0171e685-cc5b-4bb1-899c-95dd5262b609.jpg?v=1730086810 LMT Onsrud 67-215 Solid Carbide Upcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter primary image of LMT Onsrud 67-215 Solid Carbide Upcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-252 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41QHW8jWMqL_4f08b880-204c-4285-b394-c2f38ae7e3b9.jpg?v=1730086813 LMT Onsrud 60-252 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Dia primary image of LMT Onsrud 60-252 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-52-706 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31wzGE0BfQL_102677d6-b554-4c86-b756-9d8bb8fa63df.jpg?v=1730086818 LMT Onsrud 52-706 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter primary image of LMT Onsrud 52-706 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-62-776 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31B18-GH11L_744cee78-4de4-4c97-836c-67e9886b621e.jpg?v=1730086825 LMT Onsrud 62-776 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter primary image of LMT Onsrud 62-776 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-172mw 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41UeVp0xbOL_b6f69283-90ec-48a1-803e-15ea4e95e9b0.jpg?v=1730086832 LMT Onsrud 60-172MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank primary image of LMT Onsrud 60-172MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 4.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-250 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41QHW8jWMqL_ea5d051d-3b5c-4c28-953d-bba56f030a90.jpg?v=1730086839 LMT Onsrud 60-250 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Dia primary image of LMT Onsrud 60-250 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-67-212 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41HXeXMGqcL_e4c02929-0870-47a2-8302-2f440978e9a5.jpg?v=1730086845 LMT Onsrud 67-212 Solid Carbide Downcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter primary image of LMT Onsrud 67-212 Solid Carbide Downcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-67-205 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41g89suaOQL_c9896e61-df6c-41f2-bbc8-d59fab144049.jpg?v=1730086852 LMT Onsrud 67-205 Solid Carbide Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter primary image of LMT Onsrud 67-205 Solid Carbide Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-167mw 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41UeVp0xbOL_f07d7b63-5b55-407d-b0ef-4eb20321210f.jpg?v=1730086857 LMT Onsrud 60-167MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank D primary image of LMT Onsrud 60-167MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-64-031 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/415RlK-WsnL_3169434f-29fa-47f0-bfee-ff577be95995.jpg?v=1730086865 LMT Onsrud 64-031 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter primary image of LMT Onsrud 64-031 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-66-936altin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41lcW7OsThL.jpg?v=1730086871 LMT Onsrud 66-936ALTIN High Performance Composite Router with Drill Point, AlTiN Finish, 1-1/8" Cutting Length, 1/2" Cutting Diameter, 1/2" Shank Diameter, 3" Overall Length (Pack of 1) primary image of LMT Onsrud 66-936ALTIN High Performance Composite Router with Drill Point, AlTiN Finish, 1-1/8" Cutting Length, 1/2" Cutting Diameter, 1/2" Shank Diameter, 3" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-66-912altin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41RDoCp4AvL.jpg?v=1730086877 LMT Onsrud 66-912ALTIN High Performance Composite Router with Drill Point, AlTiN Finish, 1" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3" Overall Length (Pack of 1) primary image of LMT Onsrud 66-912ALTIN High Performance Composite Router with Drill Point, AlTiN Finish, 1" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-60-126mw 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41UeVp0xbOL_a9c5b7b6-8c76-4460-9241-d528ce16ce5c.jpg?v=1730086883 LMT Onsrud 60-126MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank primary image of LMT Onsrud 60-126MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-246 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41QHW8jWMqL_7e51d048-bd24-4ae2-bced-9cf32a7ee59e.jpg?v=1730086885 LMT Onsrud 60-246 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Dia primary image of LMT Onsrud 60-246 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-271 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41TH253hGAL_3951ee75-d31c-4825-9f6b-105cd1c02d1f.jpg?v=1730086888 LMT Onsrud 60-271 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 5.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diame primary image of LMT Onsrud 60-271 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 5.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-37-11 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41aCmTR0brL.jpg?v=1730086892 LMT Onsrud Cutter 37-00 Series Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute primary image of LMT Onsrud Cutter 37-00 Series Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute https://www.newbiehack.com/products/endmill-onsrud-37-10 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41aCmTR0brL_513d3eed-e6ac-474a-bb2a-e3a792c43bc6.jpg?v=1730086897 LMT Onsrud 37-10 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.090" Tip Diameter, 60 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) primary image of LMT Onsrud 37-10 Solid Carbide Engraving Tool, Uncoated (Bright) Finish, 1 Flute, 0.090" Tip Diameter, 60 Degree, 1/4" Shank Diameter, 2" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-61-082 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31ci-gQNiCL.jpg?v=1730086901 LMT Onsrud 61-082 1/4 Sc S/E Straight O Flute primary image of LMT Onsrud 61-082 1/4 Sc S/E Straight O Flute https://www.newbiehack.com/products/endmill-onsrud-61-084 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_2024-12-24_140820.png?v=1735067329 LMT Onsrud 61-084 1/4 Sc S/E Straight O Flute https://www.newbiehack.com/products/endmill-onsrud-66-933altin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41kJyCGicyL.jpg?v=1730086910 LMT Onsrud 66-933ALTIN High Performance Composite Router with No Point, AlTiN Finish, 1-1/8" Cutting Length, 1/2" Cutting Diameter, 1/2" Shank Diameter, 3" Overall Length (Pack of 1) primary image of LMT Onsrud 66-933ALTIN High Performance Composite Router with No Point, AlTiN Finish, 1-1/8" Cutting Length, 1/2" Cutting Diameter, 1/2" Shank Diameter, 3" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-66-921altin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41vZXuEWL-L.jpg?v=1730086916 LMT Onsrud 66-921ALTIN High Performance Composite Router with No Point, AlTiN Finish, 1" Cutting Length, 3/8" Cutting Diameter, 3/8" Shank Diameter, 3" Overall Length (Pack of 1) primary image of LMT Onsrud 66-921ALTIN High Performance Composite Router with No Point, AlTiN Finish, 1" Cutting Length, 3/8" Cutting Diameter, 3/8" Shank Diameter, 3" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-60-244 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41QHW8jWMqL_e932f7b4-8f86-43fd-9b6e-5cfc6d92de6c.jpg?v=1730086920 LMT Onsrud 60-244 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Dia primary image of LMT Onsrud 60-244 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-272 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41QHW8jWMqL_425e6d82-7c55-4417-9e7d-79bba73e44eb.jpg?v=1730086922 LMT Onsrud 60-272 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 5.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Dia primary image of LMT Onsrud 60-272 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 5.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-60-243 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41TH253hGAL_129510c3-f505-4e3e-8c75-54c777837767.jpg?v=1730086925 LMT Onsrud 60-243 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diame primary image of LMT Onsrud 60-243 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-66-935altin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/411D35MLQXL.jpg?v=1730086930 LMT Onsrud 66-935ALTIN High Performance Composite Router with Endmill Point, AlTiN Finish, 1-1/8" Cutting Length, 1/2" Cutting Diameter, 1/2" Shank Diameter, 3" Overall Length (Pack of 1) primary image of LMT Onsrud 66-935ALTIN High Performance Composite Router with Endmill Point, AlTiN Finish, 1-1/8" Cutting Length, 1/2" Cutting Diameter, 1/2" Shank Diameter, 3" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-66-924altin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41gNQ6iOSlL.jpg?v=1730086937 LMT Onsrud 66-924ALTIN High Performance Composite Router with Drill Point, AlTiN Finish, 1" Cutting Length, 3/8" Cutting Diameter, 3/8" Shank Diameter, 3" Overall Length (Pack of 1) primary image of LMT Onsrud 66-924ALTIN High Performance Composite Router with Drill Point, AlTiN Finish, 1" Cutting Length, 3/8" Cutting Diameter, 3/8" Shank Diameter, 3" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-66-922altin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41TVOOm46YL.jpg?v=1730086944 LMT Onsrud 66-922ALTIN High Performance Composite Router with Burr Point, AlTiN Finish, 1" Cutting Length, 3/8" Cutting Diameter, 3/8" Shank Diameter, 3" Overall Length (Pack of 1) primary image of LMT Onsrud 66-922ALTIN High Performance Composite Router with Burr Point, AlTiN Finish, 1" Cutting Length, 3/8" Cutting Diameter, 3/8" Shank Diameter, 3" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-66-915altin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41lnOPDki1L.jpg?v=1730086950 LMT Onsrud 66-915ALTIN High Performance Composite Router with Endmill Point, AlTiN Finish, 1-1/2" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3-1/2" Overall Length (Pack of 1) primary image of LMT Onsrud 66-915ALTIN High Performance Composite Router with Endmill Point, AlTiN Finish, 1-1/2" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3-1/2" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-66-909altin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41iV0aDPsjL.jpg?v=1730086956 LMT Onsrud 66-909ALTIN High Performance Composite Router with No Point, AlTiN Finish, 1" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3" Overall Length (Pack of 1) primary image of LMT Onsrud 66-909ALTIN High Performance Composite Router with No Point, AlTiN Finish, 1" Cutting Length, 1/4" Cutting Diameter, 1/4" Shank Diameter, 3" Overall Length (Pack of 1) https://www.newbiehack.com/products/endmill-onsrud-62-769 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/31B18-GH11L_60e04096-0426-4d07-970b-e67bd81fd014.jpg?v=1730086961 LMT Onsrud 62-769 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter primary image of LMT Onsrud 62-769 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1875" Cutting Diameter, 0.1875" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-67-216 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/41HXeXMGqcL_3b6b3d68-b679-4923-b806-20dce1fe4ac8.jpg?v=1730086968 LMT Onsrud 67-216 Solid Carbide Downcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.5000" Overall Length, 0.2500" Cutting Diameter, 0.5000" Shank Diameter primary image of LMT Onsrud 67-216 Solid Carbide Downcut Phenolic Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.5000" Overall Length, 0.2500" Cutting Diameter, 0.5000" Shank Diameter https://www.newbiehack.com/products/endmill-onsrud-61-085 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/21y4xF1C6AL_59c33315-8fa4-44bc-ab33-6394629f7c6a.jpg?v=1730086970 LMT Onsrud 61-085 1/4 Sc S/E Straight O Flute primary image of LMT Onsrud 61-085 1/4 Sc S/E Straight O Flute https://www.newbiehack.com/products/spindle-inverter-nozzle-fitting-for-water-cooled-spindle 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/12-800.jpg?v=1730086973 8mm Nozzle Fitting for WATER-COOLED SPINDLE MOTOR https://www.newbiehack.com/products/pneumatic-hydraulic-spindle-inverter-cooling-water-pump-reservoir-fan-radiator-g14fittings-silicone-tubing 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20190521_155622-800.jpg?v=1730086994 Compact Spindle Cooling Kit Main image of pump, water reservoir, fan, radiator, G1/4 fittings and silicone tubing for CNC router spindle water cooling and CPU Cooling https://www.newbiehack.com/products/sub-assemblies-z-axis-assemblies-laser-mounts-no-spindle-blacktoe-blackfoot 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/blackfoot_20laser_20mount1-800.jpg?v=1730086997 blackFoot/blackToe Laser Mounts (without spindle) blackFoot/blackToe CNC router laser mounts https://www.newbiehack.com/products/sub-assemblies-cnc-field-technical-support-service 2026-04-05T11:42:11-04:00 daily https://www.newbiehack.com/products/cnc-machine-greenbullv2-milling-laser 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0498-800.jpg?v=1730087007 greenBull Version 2 4'x8' and 5'x10' CNC Router Kit greenBull V2 60 degree front view https://www.newbiehack.com/products/bearing-5-pillow-block-flange 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20241104_192837.jpg?v=1730767949 Pillow Block 1/2" Bearing https://www.newbiehack.com/products/electronicsandmotors-power-supply-24v-1a-dc 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/24v1apowersupply1-800.jpg?v=1730087020 24V 1A DC Switching Power Supply 24V 1A DC switching power supply main picture https://www.newbiehack.com/products/spindle-inverter-female-round-connector-threaded-17mm 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/A6302250-800.jpg?v=1730087260 Round Female 4 pin 17mm NON-Threaded Spindle Connector 12mm 4 pin Non Threaded female connector main view https://www.newbiehack.com/products/spindle-inverter-male-round-connector-threaded-17mm 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20180905_154034_Bokeh-800.jpg?v=1730087037 Round Male 4 pin 17mm Threaded Spindle Connector Back view of the male round threaded spindle conector https://www.newbiehack.com/products/electronicsandmotors-power-supply-24v-10a 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_1656-800.jpg?v=1730087048 Power Supply 24V 10 amps Top main view of the 24V 10A power supply https://www.newbiehack.com/products/software-laser-component-control-software-lightburn 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/lightburn-square_720x-800.jpg?v=1730087051 LightBurn Laser Controller and CAD Design Software LightBurn Software Logo https://www.newbiehack.com/products/electronicsandmotors-electronic-component-limit-switch-proximity-inductive-pnp-normally-open 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20190121_231541__01-800.jpg?v=1730087058 Inductive Proximity Sensor Switch Inductive proximity sensor main image https://www.newbiehack.com/products/new-greenbullv2-flat 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/greenBullV2_size_02x04_angle_flat_f1_no4thaxis_f2_nolasergantry_f3_nolaser_f4_wilaserready_-800.jpg?v=1730087090 greenBullv2 flat CNC Routers greenBullV2 CNC Router, size: 02x04, angle: flat, f1: no 4th axis, f2: no laser gantry, f3: no laser on head https://www.newbiehack.com/products/new-greenbullv2-60degree 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/greenBullV2_size_04x08_angle_60dg_f1_no4thaxis_f2_nolasergantry_f3_nolaser_f4_wilaserready_-800.jpg?v=1730087100 greenBullv2 60 Degree CNC Routers greenBullV2 CNC Router, size: 04x08, angle: 60 degree, f1: no 4th axis, f2: no laser gantry, f3: no laser on head https://www.newbiehack.com/products/electronicsandmotors-connector-round-female-4pin-12mm-cable 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20190429_165609-800.jpg?v=1730087114 4 Pin Round Female Connector Cable End Cable End female round 12mm connector overall view https://www.newbiehack.com/products/electronicsandmotors-connector-round-female-4pin-12mm-panel 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20190429_172001-800.jpg?v=1730087125 4 Pin Round Male Connector 12mm Panel End round male panel end connector 12mm main image https://www.newbiehack.com/products/cnc-machine-fabricator-pro-milling-plans 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_0705-800_21687bd7-e2d3-4c90-92a1-fc91c4055029.jpg?v=1730087128 Fabricator Pro Plans Fabricator Pro - Metal CNC Router Machine https://www.newbiehack.com/products/cnc-machine-plansset-milling-plans 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/planssetoption-1-800.jpg?v=1730087141 CNC Router and Laser Plans Set CNC router and laser plans - instructions https://www.newbiehack.com/products/electronicsandmotors-breakout-relays-relay-board-dual-250v-10a-24v 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_7295-800.jpg?v=1730087152 24VDC Dual Relay Module View of the input side of the 24VDC dual relay module https://www.newbiehack.com/products/3d-printer-component-cnc-electronicsandmotors-shieldedcable-wire-3-conductor-22-awg-wrcon-cablewire3conductor22awg 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20200916_153949_Bokeh-800.jpg?v=1730087155 3 Conductor 22 AWG SHIELDED Cable 22/3 AWG Shielded Stranded cable insulation removed https://www.newbiehack.com/products/3d-printer-component-cnc-electronicsandmotors-shieldedcable-wire-2-conductor-22-awg-wrcon-cablewire2conductor22awg 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20200916_154233-800.jpg?v=1730087158 2 Conductor 22 AWG SHIELDED Cable 22/2 Shielded Stranded Cable with insulation removed https://www.newbiehack.com/products/3d-printer-component-cnc-electronicsandmotors-shieldedcable-wire-4-conductor-18-awg-wrcon-cablewire4conductor18awg 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20200916_153311-800.jpg?v=1730087159 4 Conductor 18 AWG SHIELDED Cable 18/4 AWG Shielded stranded cable with insulation removed https://www.newbiehack.com/products/3d-printer-component-cnc-electronicsandmotors-cable-wire-2-conductor-18-awg-wrcon-cablewire3conductor22awg 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20200916_154431-800.jpg?v=1730087161 2 Conductor 18 AWG Unshielded Cable 18/2 unshielded stranded cable https://www.newbiehack.com/products/electronicsandmotors-electronic-component-plasma-thc-plasmacontrollerandsensor 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_7310-800.jpg?v=1730087172 Plasma Controller and Sensor THC (Torch Height Controller) Main image of the plasma torch height controller https://www.newbiehack.com/products/mechanical-leadscrews-ball-screw-25mm-5tpi 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_7338-800.jpg?v=1730087182 25mm Ball Screw with Ball Nut with Approximately 5 turns per inch View of the 25mm ball screw and nut https://www.newbiehack.com/products/electronicsandmotors-connector-ribbon-cable-male-connector-4-pin-1-27mmpitch 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/pokeys57cnc-estop-connector-thumb.jpg?v=1730087190 E-Stop Ribbon Cable Connector for the Pokeys57CNC Controller micro-match wire to board connector male 4 pin thumbnail https://www.newbiehack.com/products/cnc-machine-xtoolp2-laser-cutter-engraver 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202023-12-02_20204218-800.jpg?v=1730087192 XTool P2 Laser Cutter and Engraver XTool P2 main image https://www.newbiehack.com/products/electronicsandmotors-nema34-1100ozin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-09-03_20185708-800.jpg?v=1730087197 NEMA 34 Stepper Motor (1100 oz-in 14mm single shaft) 6 Amps stepper motor nema 34 1100 oz-in https://www.newbiehack.com/products/electronicsandmotors-power-supply-60v 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/A6302119-800.jpg?v=1730087204 Power Supply 60 Volts DC 6.6 Amps 60VDC 6 amp power supply https://www.newbiehack.com/products/electronicsandmotors-nema34-1699ozin 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/A6302088-800.jpg?v=1730087211 NEMA 34 Stepper Motor (1699 oz-in 14mm single shaft) 6 Amps 1600 oz-in 12NM Stepper motor open loop front view https://www.newbiehack.com/products/electronicsandmotors-electronic-component-e-stop-button-switch-safety-modular 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/emergencystopbuttonmodular18-800.png?v=1730087224 Modular E-Stop (Emergency Stop) Button Modular emergency stop button main image https://www.newbiehack.com/products/cnc-computer-system-repair 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/repairretrofit1-800.jpg?v=1730087225 CNC Electronics Repair and Retrofitting test https://www.newbiehack.com/products/electronicsandmotors-electronic-component-plasma-thc-plasmasens-sensor 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/A6302139-800.jpg?v=1730087227 Plasma Sense THC (Torch Height Controller) Plasma Sense with the fiber optic cable, ribbon cable and connector to the pokeys57CNC https://www.newbiehack.com/products/electronicsandmotors-electronic-component-breakout-pooptoin-inputs 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/industrial_20Optical_20Isolator_20for_20Pokeys57_20_11_-800.jpg?v=1730087231 PoOptoIn Isolated Input Breakout Board for Pokeys57CNC Controller PoOptoIn Industrial optically isolated input board for pokeys57CNC https://www.newbiehack.com/products/cnc-computer-system-custom-cnc-system 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202023-11-09_20110812-800.jpg?v=1730087250 Plug-And-Play CNC Control Electronics System CNC electronics cabinet for closed loop stepper motors and drivers https://www.newbiehack.com/products/newbiehack-microcontroller-arm-stmicro-stm32f0r6-advanced-kitbook 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/ARMAdvancedWithBook-800.jpg?v=1730087253 ARM Microcontroller Advanced Kit with Book The ARM STM32F030 Advanced kit with the book ARM Microcontrollers Programming and Circuit Building Volume 1 https://www.newbiehack.com/products/electronicsandmotors-electronic-component-breakout-standalone-controller 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/standalonecontroller1-800.jpg?v=1730087263 CNC Standalone Controller (No Computer Needed) standalong cnc controller main image https://www.newbiehack.com/products/cnc-machine-woodsmithcnc-kit 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_2024-12-30_202921.png?v=1735608583 Woodsmith CNC Kit https://www.newbiehack.com/products/cnc-machine-greenbullv2-milling-plans 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/greenbullv2plansimage1-800.jpg?v=1730087266 greenBull v2 Large CNC Router Plans Main image of the greenbullv2 4x8 with only the cnc gantry https://www.newbiehack.com/products/electronicsandmotors-electronic-component-plasma-thc-plasmasenseoutonly 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_7319-800_ba61f6c5-e2e2-4d81-92b4-c39126de7373.jpg?v=1730087270 PlasmaSenseOut Module Only PlasmaSenseOut torch Height controller module width https://www.newbiehack.com/products/electronicsandmotors-electronic-component-plasma-thc-plasmasensinterfaceonly 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202023-12-28_20212035-800.jpg?v=1730087273 PlasmaSensInterface (receiver) Only PlasmaSensInterface https://www.newbiehack.com/products/electronicsandmotors-electronic-component-e-stop-button-switch-safety-smallmetal 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/pressingmetalESTOPswitch-800.jpg?v=1730087284 Small All Metal E-Stop (Emergency Stop) Button Pressing the all metal ESTOP push button switch https://www.newbiehack.com/products/electronicsandmotors-electronic-component-button-switch-small-metal-blue 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20240417_152351__01__01-800.jpg?v=1730087294 Metal Push Button with LED Indicator Blue Push Button Switch with LED main image https://www.newbiehack.com/products/electronicsandmotors-electronic-component-power-switch-contactor-63a 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-07-18_20150603-800.jpg?v=1730087296 AC Contactor 63A 63 amp contactor CT1-63 https://www.newbiehack.com/products/electronicsandmotors-electronic-component-breakout-controller-handwheel-mach3-wireless 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-08-05_20191101-800.jpg?v=1730087298 Wireless CNC Handwheel Pendant Wireless pendant https://www.newbiehack.com/products/3dprinter-resin-printer-lcd-14k-10_1inch-l8_8xw5xh9_3 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-08-06_20181759-800.jpg?v=1730087304 Phrozen Sonic Mighty Revo 14K phrozen Sonic Mighty Revo LCD Resin 3D Printer, 14K Mono 10.1" https://www.newbiehack.com/products/3dprinter-resin-printer-lcd-8k-15inch-l12_9xw7_3xh11_8 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-08-06_20193059-800.jpg?v=1730087309 Phrozen Sonic Mega 8K S Phrozen Sonic Mega 8KS https://www.newbiehack.com/products/3dprinter-resin-printer-lcd-14k-10_1inch-l8_7xw4_9xh9 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-08-07_20143126-800.jpg?v=1730087316 ANYCUBIC Photon Mono M7 PRO 14K Anycubic Photon Mono M7 PRO 14K main image https://www.newbiehack.com/products/3dprinter-resin-part-release_film-nfep-pfa 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-08-07_20185216-800.jpg?v=1730087318 nFEP (PFA) Release Film for 3D Resin Printers nFEP (PFA) 3D Resin Printer Release Film main image https://www.newbiehack.com/products/3dprinter-resin-part-heater-miniheater 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-08-07_20220515-800.jpg?v=1730087320 3D Resin Printer Mini Heater 3D Resin Printer mini heater https://www.newbiehack.com/products/3dprinter-resin-part-post_process-washandcure 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-08-07_20222926-800.jpg?v=1730087321 Wash and Cure Station Anycubic Wash and cure station https://www.newbiehack.com/products/3dprinter-resin-printer-lcd-12k-10inch-l8_6xw4_8xh8_6 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-08-13_20191325-800.jpg?v=1730087329 ELEGOO Saturn 4 12K ELEGOO Saturn 4 12K Main image https://www.newbiehack.com/products/cnc-computer-system-enclosure-steel 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-08-19_20211847-800.jpg?v=1730087340 Steel Enclosures Steel Enclosure with included components https://www.newbiehack.com/products/cam-software-alibre 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-08-21_20175050-800.jpg?v=1730087343 Alibre (My Parametric CAD Go-To!) Alibre 3D Parametric software https://www.newbiehack.com/products/3d-printer-component-cnc-electronicsandmotors-shieldedcable-wire-4-conductor-14-awg-wrcon-cablewire4conductor14awg 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-08-25_20213729-800.jpg?v=1730087345 14AWG 4-Core Shielded CNC Wire: Essential for Precision Machinery 14 AWG 4 stranded conductors shielded cable https://www.newbiehack.com/products/axes-4th-65mmchuck-55mmcenterheight-0_3degperstep 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-09-03_20200426-800.jpg?v=1730087346 4th Axis with Tail Stock 65mm Chuck 4th Axis with a 65mm 3 jaw chuck https://www.newbiehack.com/products/electronicsandmotors-power-supply-24v-3_2a-dc-din 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-09-17_20173325a-800.jpg?v=1730087350 24V 3.2A DC DIN Mount Power Supply DR-75-24 75W DIN Rail Power Supply main image https://www.newbiehack.com/products/electronicsandmotors-electronic-component-power-switch-circuit-breaker-din 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-09-17_20171244-800.jpg?v=1730087354 Circuit Breaker DIN Mounted Miniature Circuit Breaker, 30 Amp, Single Pole https://www.newbiehack.com/products/cnc-machine-greenleanv2-milling-plans 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-09-29_20203216-800.jpg?v=1730087358 greenLean v2 Large CNC Router Plans greenLean v2 CNC router plans image https://www.newbiehack.com/products/newbiehack-microcontroller-arm-book 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-09-29_20231215-800.jpg?v=1730087360 ARM Microcontrollers: Programming and Circuit Building Volume 1 Book Arm Microcontrollers programming and circuit building volume 1 by Patrick hood-Daniel front cover https://www.newbiehack.com/products/6-0-amp-stepper-motor-driver-400-25000-steps-per-revolution 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMAGE-EDIT_424e6b19-f692-4c64-ad07-64bcc7ef3558.png?v=1733258999 6.0 Amp Stepper Motor Driver 400-25000 Steps Per Revolution https://www.newbiehack.com/products/m12-4-pin-female-sensor-connector-for-proximity-limit-e-stop-switches 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2024-12-03172617.png?v=1733264785 M12 4-Pin Female Sensor Connector (For Proximity, Limit, E-Stop Switches) https://www.newbiehack.com/products/m12-4-pin-male-sensor-connector-a-code-for-proximity-limit-and-e-stop-switches-and-other-sensors 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2024-12-03190730.png?v=1733270863 M12 4-Pin Male Sensor Connector A Code (For Proximity, Limit and E-Stop Switches and Other Sensors) https://www.newbiehack.com/products/m12-4-pin-male-to-female-sensor-cable-a-code-2-meters-for-proximity-limit-and-e-stop-switches-and-other-sensors 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2024-12-03192318.png?v=1733271809 M12 4-Pin Male to Female Sensor Cable A Code 2 Meters (For Proximity, Limit and E-Stop Switches and Other Sensors) https://www.newbiehack.com/products/fabricator-pro-cnc-machine-digital-plans 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/fabricatpro_size_05x10_angle_flat_f1_no4thaxis_f2_nolasergantry_f3_nolaser_f4_nolaserready.png?v=1733353401 Fabricator Pro CNC Machine Digital Plans https://www.newbiehack.com/products/greenlean-v2-large-cnc-router-digital-plans 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_202024-09-29_20203216-800.jpg?v=1730087358 greenLean v2 Large CNC Router Digital Plans greenLean v2 CNC router plans image https://www.newbiehack.com/products/greenbull-v2-large-cnc-router-digital-plans 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/greenbullv2plansimage1-800.jpg?v=1730087266 greenBull v2 Large CNC Router Digital Plans Main image of the greenbullv2 4x8 with only the cnc gantry https://www.newbiehack.com/products/e-stop-emergency-stop-button-with-led-indicator 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2024-12-04000725.png?v=1733289587 E-Stop (Emergency Stop) Button With LED Indicator https://www.newbiehack.com/products/4-x-8-vertical-laser-xl-laser-cutter-engraver-digital-plans 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/VLXL_size_04x08_angle_flat_f1_no4thaxis_f2_wilasergantry_f3_wilaser_f4_nolaserready.png?v=1733353476 4' x 8' Vertical Laser XL - Laser Cutter/Engraver Digital Plans https://www.newbiehack.com/products/1k-ohm-1-4-watt-through-hole-resistor 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/resistor-10k-quarterwatt-300.jpg?v=1730085065 1K Ohm 1/4 Watt Through Hole Resistor 10K through hole 1/4 watt resistor https://www.newbiehack.com/products/5v-1-5a-voltage-regulator-through-hole 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/7805-Voltage-Regulator-IC2_1.webp?v=1733623623 5V 1.5A Voltage Regulator Through Hole https://www.newbiehack.com/products/2-54mm-0-1-pitch-crimp-pins 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_2024-12-07_211235.png?v=1733623988 Crimp pins for SIL housings https://www.newbiehack.com/products/crimp-pins-for-sil-housings-copy 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/M20-1060500_SPL_1.jpg?v=1733624519 5-Position SIL Housing https://www.newbiehack.com/products/2-position-sil-housing 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/images_1.jpg?v=1733624780 2-Position SIL Housing https://www.newbiehack.com/products/ac-power-connector-c14-male-3-pins-screw-panel-mount-10a-250v 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2024-12-13201531.png?v=1734139365 AC Power Connector C14 Male 3 Pins Screw Panel Mount 10A 250V IEC 320 https://www.newbiehack.com/products/ac-power-connector-c14-male-3-pins-screw-panel-mount-10a-250v-iec-320-with-fuse-and-switch 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2024-12-13204607.png?v=1734140862 AC Power Connector C14 Male 3 Pins Screw Panel Mount 10A 250V IEC 320 With Fuse and Switch https://www.newbiehack.com/products/round-female-4-pin-17mm-threaded-spindle-connector 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot_2024-12-14_234200.png?v=1734238030 Round Female 4 pin 17mm (H17) Threaded Spindle Connector https://www.newbiehack.com/products/terminal-blocks-for-din-rails 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2024-12-18225755.jpg?v=1734580911 Terminal Blocks for DIN Rails https://www.newbiehack.com/products/din-rails 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2024-12-18233145.jpg?v=1734582746 DIN Rails (Single 12 Inch Length) https://www.newbiehack.com/products/closed-loop-nema-34-stepper-motor-679-oz-in-14mm-single-shaft-and-mating-driver 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2024-12-19000227.jpg?v=1734584706 Closed Loop NEMA 34 Stepper Motor (1274 oz-in 14mm single shaft) and Mating Driver https://www.newbiehack.com/products/closed-loop-nema-23-stepper-motor-425-oz-in-8mm-single-shaft-and-mating-driver 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2024-12-19002531.jpg?v=1734586094 Closed Loop NEMA 23 Stepper Motor (425 oz-in 8mm single shaft) and Mating Driver https://www.newbiehack.com/products/closed-loop-nema-34-stepper-motor-1699-oz-in-14mm-single-shaft-and-mating-driver 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2024-12-19010551.jpg?v=1734588564 Closed Loop NEMA 34 Stepper Motor (1699 oz-in 14mm single shaft) and Mating Driver https://www.newbiehack.com/products/closed-loop-nema-34-stepper-motor-679-oz-in-14mm-single-shaft-and-mating-driver-1 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2024-12-19011548.jpg?v=1734589132 Closed Loop NEMA 34 Stepper Motor (679 oz-in 14mm single shaft) and Mating Driver https://www.newbiehack.com/products/thc-2-plasma-torch-height-control 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2024-12-25192933.png?v=1735173126 THC-2 Plasma Torch Height Control https://www.newbiehack.com/products/24vdc-quad-4-relay-module 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2024-12-29175117.png?v=1735512694 24VDC Quad (4 Channel) Relay Module https://www.newbiehack.com/products/greenbull-v2-small-2x4-cnc-router-digital-plans 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/greenBullV2_size_02x04_angle_flat_f1_no4thaxis_f2_nolasergantry_f3_nolaser_f4_wilaserready.png?v=1735601401 greenBull v2 Small (2'x4') CNC Router Digital Plans https://www.newbiehack.com/products/masso-g3-touch 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2025-01-01205554.png?v=1735783026 Masso G3 Touch https://www.newbiehack.com/products/plasma-controller-and-sensor-thc-torch-height-controller-copy 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2025-01-02111907.png?v=1735834792 C98 Plasma Voltage Divider 50:1 (Max 500V Input) https://www.newbiehack.com/products/64-pin-lqfp-breakout-3-sided-configuration 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/IMG_20250426_204632.jpg?v=1745716925 64 Pin LQFP Breakout (3 Sided Configuration) https://www.newbiehack.com/products/usb-to-rs485-converter 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2025-07-11152416.png?v=1752261951 USB to RS485 Converter https://www.newbiehack.com/products/c25xp-professional-wiring-add-on-for-ethernet-smooth-stepper-enhanced-interface-safety-features 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2025-07-12141647.png?v=1752344284 C25XP Professional Wiring Add-On for Ethernet Smooth Stepper - Enhanced Interface & Safety Features https://www.newbiehack.com/products/ess-ethernet-smooth-stepper-board 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/Screenshot2025-07-12150900.png?v=1752347468 ESS - Ethernet Smooth Stepper Board https://www.newbiehack.com/products/mdthc-2-mini-display-for-cnc-plasma-torch-height-controller-systems 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/MDTHC-2_MDTHC-2MiniDisplayforPlasmaTorchHeightControl_051a89a7-8ef3-4d0d-9cf7-760bfb6d51e6.webp?v=1775331674 MDTHC-2 Mini Display for CNC Plasma Torch Height Controller Systems https://www.newbiehack.com/products/thc-1-plasma-torch-height-control-module-with-lcd-display-and-isolated-outputs 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/THC-1_THC-1PlasmaTorchHeightControl.jpg?v=1775331951 THC-1 Plasma Torch Height Control Module with LCD Display and Isolated Outputs https://www.newbiehack.com/products/pts-1-plasma-touch-sensor-module-for-cnc-plasma-tables-with-isolated-inputs-and-relay-outputs 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/PTS-1_PTS-1PlasmaTouchSensor.jpg?v=1775332795 PTS-1 Plasma Touch Sensor Module for CNC Plasma Tables with Isolated Inputs and Relay Outputs https://www.newbiehack.com/products/fh-1-plasma-floating-head-assembly-with-magnetic-breakaway-for-cnc-plasma-tables 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/FH-1_FH-1PlasmaFloatingHeadwithMagneticBreakaway.webp?v=1775333099 FH-1 Plasma Floating Head Assembly with Magnetic Breakaway for CNC Plasma Tables https://www.newbiehack.com/products/non-contact-capacitive-height-sensor-control-unit-for-cnc-plasma-and-oxy-fuel-cutters 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/CAP04_Non-ContactHeightSensorforPlasmaandOxyFuelCutter.jpg?v=1775334271 Non-Contact Capacitive Height Sensor Control Unit for CNC Plasma and Oxy Fuel Cutters https://www.newbiehack.com/products/plasmadiv-plasma-voltage-divider-with-isolated-0-10v-output-and-start-relay-for-cnc-plasma-cutters 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/PD_Plasmavoltagedivider_PlasmaDiv.webp?v=1775334893 PlasmaDiv Plasma Voltage Divider with Isolated 0-10V Output and Start Relay for CNC Plasma Cutters https://www.newbiehack.com/products/adapterboard10v-3v3-analog-signal-converter-for-pokeys57cnc-pokeys57u-pokeys57e-and-arduino 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/AdapterBoard10V-3.3Vplasma_AdapterBoard10V-3V3.webp?v=1775335270 AdapterBoard10V-3V3 Analog Signal Converter for PoKeys57CNC, PoKeys57U, PoKeys57E, and Arduino https://www.newbiehack.com/products/3-meter-motor-and-encoder-cable-set-for-dyn4-40mm-60mm-and-80mm-frame-servo-motors 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/CS-D4-1-3_K_SETOF3MCABLESFORDYN440-60-80MMSERVO.png?v=1775335608 3 Meter Motor and Encoder Cable Set for DYN4 40mm, 60mm, and 80mm Frame Servo Motors https://www.newbiehack.com/products/5-meter-motor-and-encoder-cable-set-for-dyn4-40mm-60mm-and-80mm-frame-servo-motors 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/CS-D4-1-5_K_SETOF5MCABLESFORDYN440-60-80MMSERVO.png?v=1775335759 5 Meter Motor and Encoder Cable Set for DYN4 40mm, 60mm, and 80mm Frame Servo Motors https://www.newbiehack.com/products/10-meter-motor-and-encoder-cable-set-for-dyn4-40mm-60mm-and-80mm-frame-servo-motors 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/CS-D4-1-10_K_SETOF10MCABLESFORDYN440-60-80MMSERVO.png?v=1775335942 10 Meter Motor and Encoder Cable Set for DYN4 40mm, 60mm, and 80mm Frame Servo Motors https://www.newbiehack.com/products/8070e-digital-bipolar-stepper-motor-driver-with-32-bit-dsp-7-0a-output-and-up-to-51-200-steps-rev 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/8070E_8070E-DigitalBipolarStepperMotorDriver32bitDSP.png?v=1775336234 8070E Digital Bipolar Stepper Motor Driver with 32-Bit DSP, 7.0A Output, and Up to 51,200 Steps/Rev https://www.newbiehack.com/products/geckodrive-g201x-stepper-motor-driver-80vdc-7a-microstep-drive-for-nema-17-to-nema-42-motors 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/G201X_GeckodriveG201X80V-7AStepperMotorDriver.webp?v=1775336508 Geckodrive G201X Stepper Motor Driver, 80VDC 7A Microstep Drive for NEMA 17 to NEMA 42 Motors https://www.newbiehack.com/products/nema-23-closed-loop-stepper-motor-kit-with-5080d4-driver-439-oz-in-torque-1-4-shaft-1000-line-encoder-and-3m-cable 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/N23CL1_4S_NEMA23ClosedLoopStepperMotorKit_439oz-in_1-4_ShaftW-3MCables.jpg?v=1775336697 NEMA 23 Closed-Loop Stepper Motor Kit with 5080D4 Driver, 439 oz-in Torque, 1/4" Shaft, 1000-Line Encoder, and 3m Cable https://www.newbiehack.com/products/4-5kw-water-cooled-atc-cnc-spindle-220vac-24-000-rpm-pneumatic-automatic-tool-changer 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/4500WATC_4500WATCAutomaticToolChangerSpindle_220VAC_Max24000RPM_Max4500W.jpg?v=1775336904 4.5KW Water-Cooled ATC CNC Spindle, 220VAC, 24,000 RPM, Pneumatic Automatic Tool Changer https://www.newbiehack.com/products/masso-relay-connector-board-with-26-pin-ribbon-cable-for-relay-and-breakout-board-integration 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/M40-RibbonCable_MASSORelayConnectorBoard.png?v=1775337224 MASSO Relay Connector Board with 26-Pin Ribbon Cable for Relay and Breakout Board Integration https://www.newbiehack.com/products/uc300eth-ethernet-motion-controller-for-mach3-mach4-and-uccnc-6-axis-5-lpt-ports-up-to-400khz 2026-04-05T11:42:11-04:00 daily https://cdn.shopify.com/s/files/1/0664/7516/3822/files/UC300ETH_UC300ETHETHERNETMOTIONCONTROLLER.jpg?v=1775337500 UC300ETH Ethernet Motion Controller for Mach3, Mach4, and UCCNC, 6-Axis, 5 LPT Ports, Up to 400kHz