• primary image of LMT Onsrud 60-171MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter
  • primary thumbnail of LMT Onsrud 60-171MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter
  • variant image of LMT Onsrud 60-171MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter
  • variant image of LMT Onsrud 60-171MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter
  • variant image of LMT Onsrud 60-171MW Solid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.5000" Overall Length, 0.5000" Cutting Diameter, 0.5000" Shank Diameter
1 5

BuildYourCNC

LMT Onsrud 60-171MW Vollhartmetall Max Life Kompressionsspiralfräser, Zoll, unbeschichtet (blank), 30 Grad Helixwinkel, 2 Schneiden, 3.5000" Gesamtlänge, 0.5000" Schneiddurchmesser, 0.5000" Schaft

LMT Onsrud 60-171MW Vollhartmetall Max Life Kompressionsspiralfräser, Zoll, unbeschichtet (blank), 30 Grad Helixwinkel, 2 Schneiden, 3.5000" Gesamtlänge, 0.5000" Schneiddurchmesser, 0.5000" Schaft

$145.45 USD
$145.45 USD
Sale Ausverkauft
Versand wird beim Checkout berechnet
Titel

LMT Onsrud 60-171MW LMT Onsrud 60-171MW Vollhartmetall-Max-Life-Kompression-Spiralfräser, Zoll, unbeschichtete (blanke) Oberfläche, 30 Grad Helixwinkel, 2 Schneiden, 3.5000" Gesamtlänge, 0.5000" Schneiddurchmesser, 0.5000" Schaftdurchmesser. Entwickelt für maximale Lebensdauer beim Schneiden in Anwendungen mit hohem Verschleiß. Einzigartige Geometrien und Hartmetalle verbessern die Verschleißeigenschaften des Werkzeugs bei abrasiven Anwendungen mit überlegener Oberflächengüte. Verwendung auf doppelseitig laminierten und furnierten Materialien.

Vollständige Details anzeigen

Questions & Answers

Have a Question?

Ask a Question

  • what is the recommended firmware for the awc708c laser controller? I see this download on the Sinjoe site: AWC708 Lite Update Firmware 160901L1

    We have not had any issues with stock firmware on the AWC708lite. Upgrading the firmware will be at your own risk. We can contact our supplier and see if they can provide a suggestion for updating firmware. Contact customerservice@buildyourcnc.com to inquire with a person who can help. Additional Information: Working area setting Additional Information: Working area setting

  • How should I connect the limit switches to my laser controller?

    If you are using the AWC708 or equivalent laser controller, the limit switches will connect between the EL input terminal and the GND terminal in normally open (NO) connection. Most limit switches can be connected as NO, or normally closed (NC). For instance, a limit switch for the X- limit will be connected from the ELX- terminal to the NO connection of the limit switch, then a connection from the GND terminal on the laser controller to the COM connection to the same limit switch.

  • Do you have instructions how to mount the AWC708 DSP on the blackTooth?

    We are working on getting these on the blackTooth page Additional Information: Ok, thanks. Do you use a separate 24V P/S for the supply voltage on the AWC708C or tap into the stepper motor P/S?