[ Log In ]
3 pin slide switch

SPDT Slide Switch 3 pin 30V

$1.49
Qty:
STM32F0 microcontroller and interface board top view

STM32 M0 MCU and Interface to Breadboard

$14.95
Qty:
Image of the Atmega324p

Atmega324P

$8.50
Qty:
Serial to USB converter with Micro USB cable

USB to Serial Converter

$10.95
Qty:
Thumbnail: Crystal Oscillator 18.432 MHz for UART

18.432 MHz Crystal Oscillator 18pf 30ppm

$0.94
Qty:
Thumbnail: 22 pF Capacitor

22 pF Multilayer Ceramic Capacitor

$0.43
Qty:
Thumbnail: Quartz crystal oscillator - 16 MHz

16 MHz Crystal Oscillator 20 pF Through Hole

$0.75
Qty:
Thumbnail: 4x4 keypad top view.

4x4 Keypad with Adhesive Backing

$3.80
Qty:
Thumbnail: quad buffer line driver 74HC126E

Quad Buffer Line Driver (Through Hole)

$0.69
Qty:
USB AVR programmer

USB AVR Programmer

$9.95
Qty:

Breadboarding: Connecting the Hobby Servo to the Microcontroller to use the PWM and OCR1A

The hobby servo is connected to the microcontroller using three wires, the VCC, GND and signal wire. The signal wire is connected to the OCR1A pin of the AVR microcontroller which will output the PWM (Pulse Width Modulation).

Comments and Additional Information

Have some code to share? Or additional information? Respond here:

You need to be logged in to save a response on this page. The response must be constructive, helpful, supplimentary or to correct the existing video, code or narrative content.

Description:

Code (optional):