[ Log In ]
84 oz-in NEMA 17 Stepping motors (also called stepper motor)
Nema 11 stepper motor

NEMA 11 Stepping Motor (16.7 oz-in)

$17.95
Qty:
Newbie Hack Shirt Back
NEMA 23 Stepping Motor 1.2Nm
Modular 2/5 amp stepping motor driver

2.5 Stepper Motor Driver (Modular unit)

$45.00
Qty:
NEMA 14 stepper motor
Hex Inverter

Hex Inverter 6 Input and Outputs 2-5.5v Operation

$0.95
Qty:
small aluminum heat sink and a packet of thermal compound
2x36 pin header IDC

2.54 mm (0.1") Pitch Male Connector 36 pin Header

$0.75
Qty:
USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

$4.80
Qty:

NEMA 14 Stepper Motor (17 oz-in 5mm shaft) 1.0 Amps

NEMA 14 stepper motor Dimensions for NEMA 14 stepper motor Wiring leads for NEMA 14 17 oz-in stepper motor.
NEMA 14 stepper motor Dimensions for NEMA 14 stepper motor Wiring leads for NEMA 14 17 oz-in stepper motor.

Introduction:

This NEMA 14 form factor stepper motor features 20 oz-in of holding torque in a frame smaller (36mm) than most. 5mm shaft,

Description:

This miniature sized stepper motor may appear tiny, but still boasts a hefty 17 oz-in of holding torque. These NEMA 14 stepping motors can be utilized for a wide array of functions including but not limited to: smaller CNC machines, 3D printers and prototyping machines.

Technical Specifications:

  • 1.8 degree stepping angle
  • Current/Phase: 0.4 A
  • Holding Torque: 20 oz-in / 14 Ncm
  • Number of Leads: 4

Please Make a Selection:

Qty:

Learn about the NEMA 14 Stepper Motor (17 oz-in 5mm shaft) 1.0 Amps

Download and installation of the Windows Drivers for the USBTiny AVR Pocket Programmer (pocketprog-driver.zip) from SparkFun.com.
Part 1: Making a convenient connector from a 2x3 female header to an inline 6 pin male header for SPI communication from USBTiny at the computer end to the microcontrollers MOSI, MISO, SCK, Reset, VCC...
Part 2: Making a convenient connector from a 2x3 female header to an inline 6 pin male header for SPI communication from USBTiny at the computer end to the microcontrollers MOSI, MISO, SCK, Reset, VCC...
Using the ADD LEGACY HARDWARE driver installation method for the Windows Drivers for the USBTiny AVR Pocket Programmer. A method of installing drivers that is not directly compatible with Windows or ...
Using avrdude.exe to establish a connection to the microcontroller using the USBTiny AVR Pocket Programmer to determine if the connection is correct and all of the electronics and drivers are in worki...