[ Log In ]
Tumbnail: 62 oz-in NEMA 17 Stepping motors (also called stepper motor)

NEMA 17 Stepping Motor (62 oz-in 5mm single shaft)

$19.95
Qty:
Nema 11 stepper motor

NEMA 11 Stepping Motor (16.7 oz-in)

$17.95
Qty:
Newbie Hack Shirt Back
NEMA 23 Stepping Motor 100 oz

NEMA 23 Stepping Motor

$24.95
Qty:
Modular 2/5 amp stepping motor driver

2.5 Stepper Motor Driver (Modular unit)

$45.00
Qty:
NEMA 14 stepper motor

NEMA 14 Stepping Motor (17 oz-in)

$15.95
Qty:
Hex Inverter

Hex Inverter 6 Input and Outputs 2-5.5v Operation

$0.95
Qty:
small aluminum heat sink and a packet of thermal compound
2x36 pin header IDC

2.54 mm (0.1") Pitch Male Connector 36 pin Header

$0.75
Qty:
USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

$4.80
Qty:

NEMA 17 CNC Motor (62 oz-in 5mm shaft) 1.68 Amps

62 oz-in NEMA 17 Stepping motors (also called stepper motor) Datasheet for the NEMA 17 62 oz-in Stepping (Stepper) Motor
62 oz-in NEMA 17 Stepping motors (also called stepper motor) Datasheet for the NEMA 17 62 oz-in Stepping (Stepper) Motor

Introduction:

This is about the most powerful NEMA 17 frame size CNC motor you will find. This little bundle of power features 62 oz-in of holding torque. These NEMA 17 stepper motors are perfect for all kinds of small machines like 3D Printers, Laser Cutters and Engravers, and small CNC machines.

Description:

This is high torque Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws 2A, allowing for a holding torque of 45Ncm(63.7oz.in). This stepper motor is ideal for the RepRap Prusa, Mendel 90, Rostock and similar 3D printers, as well as CNC and robotics applications. The motors are supplied with a 1 metre long power cable with a 4-pin Harwin female connector already fitted - ready to plug and print!

Electrical Specification:
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 45Ncm(63.7oz.in)
* Rated Current/phase: 2A
* Phase Resistance: 1.1ohms
* Inductance: 2.6mH+/-20%(1KHz)

Physical Specification:
* Frame Size: 42 x 42mm
* Body Length: 40mm
* Shaft Diameter: 5mm
* Shaft Length: 23mm
* D-cut Length: 21mm
* Number of Leads: 4
* Lead Length: 1000mm
* Weight: 310g

Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

NEMA 17 Stepping Motor (62 oz-in 5mm single shaft)

$19.95
Qty:

Learn about the NEMA 17 CNC Motor (62 oz-in 5mm shaft) 1.68 Amps

Download and installation of the Windows Drivers for the USBTiny AVR Pocket Programmer (pocketprog-driver.zip) from SparkFun.com.
Using a potentiometer, the speed of a motor can be controlled. The potentiometer is connected in a way that it functions as a voltage divider. The motor is connected to the potentiometer's middle le...
To make a motor spin, a battery can be connected to a DC motor.
There are many devices that can be connected to a microcontroller to provide an action, or sense the environment. Here are a few items that can be connected to a microcontroller: - Accelerometers ...
Part 1: Making a convenient connector from a 2x3 female header to an inline 6 pin male header for SPI communication from USBTiny at the computer end to the microcontrollers MOSI, MISO, SCK, Reset, VCC...