On Paper: Discusson on UART One Way Communication

Advance Your Skills Professionally! Advance Your Skills Professionally! 'ARM Microcontrollers: Programming and Circuit Building Volume 1', accompanied by a beginner-friendly advanced kit, is the ideal starting point for aspiring professionals. Esteemed in universities and high schools, this guide bypasses the complexities of Arduino, offering a more fundamental, bare-metal approach to learning. It not only simplifies the process but also sets you on a path to a more professional level in microcontroller programming. Perfect for students and hobbyists, this book is your gateway to efficiently prototyping and transitioning projects into production. Start with the fundamentals and quickly move to creating professional-level applications!

Serial to USB converter with Micro USB cable

USB to Serial Converter

$10.95

Qty:

Thumbnail: Crystal Oscillator 18.432 MHz for UART

18.432 MHz Crystal Oscillator 18pf 30ppm

$0.94

Qty:

22 pF Multilayer Ceramic Capacitor

$0.43

Qty:

Thumbnail: Quartz crystal oscillator - 16 MHz

16 MHz Crystal Oscillator 20 pF Through Hole

$0.75

Qty:

3 Foot USB Cable Type A to USB Cable Type A

USB Cable Type A Male to USB Type A Male - 3 FT

$2.65

Qty:

USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

$4.80

Qty:

Tumbnail: 62 oz-in NEMA 17 Stepping motors (also called stepper motor)

NEMA 17 Stepping Motor (62 oz-in 5mm single shaft)

$19.95 Out of Stock

Qty:

Atmega324P

$8.50

Qty:

10K Trimmer Potentiometer (Through Hole)

$0.85

Qty:

On Paper: Discusson on UART One Way Communication

The transmitting microcontroller will output the communication from its TX transmitter pin to the RX pin of the receiving microcontroller. A wire will be connected from the TX of the transmitting microcontroller to the RX of the receiving microcontroller.

A button on the transmitting microcontroller will initiate the transmission through the TX pin. The LED on the transmitting microcontroller will serve as an indicator that the push button is working. An LED on the receiver microcontroller will serve as an indication of a successful communication.

Comments and Additional Information

Have some code to share? Or additional information? Respond here:

You need to be logged in to save a response on this page. The response must be constructive, helpful, supplimentary or to correct the existing video, code or narrative content.

Description:

Code (optional):

Learn the Fundamentals of Mechatronics!

On Paper: Discusson on UART One Way Communication

Comments and Additional Information