Electronicsandmotors-Hex-Inverter-Breakout-Newbiehack-Integrated Circuits-Hex-Inverter

Advance Your Skills Professionally! Advance Your Skills Professionally! 'ARM Microcontrollers: Programming and Circuit Building Volume 1', accompanied by a beginner-friendly advanced kit, is the ideal starting point for aspiring professionals. Esteemed in universities and high schools, this guide bypasses the complexities of Arduino, offering a more fundamental, bare-metal approach to learning. It not only simplifies the process but also sets you on a path to a more professional level in microcontroller programming. Perfect for students and hobbyists, this book is your gateway to efficiently prototyping and transitioning projects into production. Start with the fundamentals and quickly move to creating professional-level applications!

Tumbnail: 62 oz-in NEMA 17 Stepping motors (also called stepper motor)

NEMA 17 Stepping Motor (62 oz-in 5mm single shaft)

$19.95 Out of Stock

Qty:

NEMA 11 Stepping Motor (16.7 oz-in)

$17.95

Qty:

ADXL 345 Accelerometer breakout with headers

ADXL345 Breakout board (I2C/SPI)

$27.95

Qty:

Magnetometer Triple Axis Compass i2c

$14.89

Qty:

NEMA 23 Stepping Motor

$24.95

Qty:

2.5 Stepper Motor Driver (Modular unit)

$45.00

Qty:

NEMA 14 Stepping Motor (17 oz-in) - Out of stock

$15.95

Qty:

Hex Inverter 6 Input and Outputs 2-5.5v Operation

$0.95

Qty:

small aluminum heat sink and a packet of thermal compound

Hex Inverter

Introduction:

Do you have a signal wire that you need to invert. This integrated circuit takes a low signal and brings it high, and takes a high signal and brings it low.

Description:

Texas Instruments SN74AHCUO4N

This hex inverter has an operating range of 2V to 5.5V. Input (A) High, Output (Y) LowInput (A) Low, Output (Y) High

The chip contains 14 pins:- Vcc on pin 14- GND on pin 76 inputs and output: 1A pin 1, 1Y pin 2, 2A pin 3, 2Y pin 4, 3A pin 5, 3Y pin 6, 4A pin 9, 4Y pin 8, 5A pin 11, 5Y pin 10, 6A pin 13, 6Y pin 12

Hex Inverter 6 Input and Outputs 2-5.5v Operation

$0.95

Qty:

Learn about the Hex Inverter

Install USBTiny Drivers

Download and installation of the Windows Drivers for the USBTiny AVR Pocket Programmer (pocketprog-driver.zip) from SparkFun.com.

Part 1: Making a Convenient SPI connector for USBTiny

Part 1: Making a convenient connector from a 2x3 female header to an inline 6 pin male header for SPI communication from USBTiny at the computer end to the microcontrollers MOSI, MISO, SCK, Reset, VCC...

Part 2: Making a Convenient SPI Header for USBTiny

Part 2: Making a convenient connector from a 2x3 female header to an inline 6 pin male header for SPI communication from USBTiny at the computer end to the microcontrollers MOSI, MISO, SCK, Reset, VCC...

Installing Legacy Hardware (USBTiny Programmer)

Using the ADD LEGACY HARDWARE driver installation method for the Windows Drivers for the USBTiny AVR Pocket Programmer. A method of installing drivers that is not directly compatible with Windows or ...

Using Avrdude.exe to Test the USBTiny

Using avrdude.exe to establish a connection to the microcontroller using the USBTiny AVR Pocket Programmer to determine if the connection is correct and all of the electronics and drivers are in worki...

Learn the Fundamentals of Mechatronics!

Hex Inverter

Learn about the Hex Inverter